DW 700 Injector Data

Tuning, troubleshooting and the nitty gritty of using rusEFI to make your engine run nicely!
Post Reply
Posts: 151
Joined: Thu Jan 14, 2021 10:16 pm

DW 700 Injector Data

Post by BeerMoneyMotorsports »

I am working on an NB2 that has a new set of DW 700 injectors installed. I have the injector data set but need to work on small pulse correction. Right now, at idle, the VE has to be really high to meet desired lambda.

DW700 with data card showing ~730cc average flow. With this being a fixed rail pressure of 400kpa, I adjusted the injector flow to 844 in the tune.

Here is the chart showing dead times and non linear portions but I do not know how to put that into our small pulse corrections. I could really use some help with this one.
image.png (192.8 KiB) Viewed 27464 times
Post Reply