Gen 4 LS - no crank trigger

Tuning, troubleshooting and the nitty gritty of using rusEFI to make your engine run nicely!
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Gen 4 LS - no crank trigger

Post by AndreyB »

i really doubt that we have such a defect.
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
ykill
Posts: 34
Joined: Thu Feb 23, 2023 7:26 pm

Re: Gen 4 LS - no crank trigger

Post by ykill »

I'll keep an update once I find out what's happening.
I find that really odd that my trigger angle is 40.
Even on my megasquirt it was 86....

I probably did something wrong somewhere...
User avatar
Dron_Gus
contributor
contributor
Posts: 450
Joined: Wed Nov 13, 2013 1:11 pm
Location: S-Pb
Github Username: dron0gus

Re: Gen 4 LS - no crank trigger

Post by Dron_Gus »

JFYI, some documentation (at least subaru) has injectors numbered according physical position, while ignitors numbered in firing order.
ykill
Posts: 34
Joined: Thu Feb 23, 2023 7:26 pm

Re: Gen 4 LS - no crank trigger

Post by ykill »

As I thought, I was the issue :lol:

Being from a megasquirt, I wired pin 1 to 8 following the firing order.
rusEFI doesn't work this way, it must be following the cylinder numbering.
I fixed that in the hardware config and it started right away
Post Reply