Protues bench testing
Posted: Sun Oct 16, 2022 12:45 am
Hi folks,
This is making my brain hurt!!
I have Proteus ECU and have wired it to run a Mazda 1.3 Skyactiv, well thats is the plan. Initially I had a issue with NO crank and cam triggers. After closer inspection the cam and crank have the same plugs but run difirrent sensors, I have sorted the wiring for that issue. I can for the life of me not get a rpm signal.
So instead of fighting it in the shed I have wired it up to a bench. Crank signal is generated by a Jimstim with a single tooth cam signal. changed the tune settings. See the link
https://rusefi.com/online/view.php?msq=1262
I have attached the signal being used to run the ECU. Please help me understand why it is making me suffer .......
My plan here is get it to work on the bench firts then the car.
Can anyone see where I am going wrong?
Regards
Ray
This is making my brain hurt!!
I have Proteus ECU and have wired it to run a Mazda 1.3 Skyactiv, well thats is the plan. Initially I had a issue with NO crank and cam triggers. After closer inspection the cam and crank have the same plugs but run difirrent sensors, I have sorted the wiring for that issue. I can for the life of me not get a rpm signal.
So instead of fighting it in the shed I have wired it up to a bench. Crank signal is generated by a Jimstim with a single tooth cam signal. changed the tune settings. See the link
https://rusefi.com/online/view.php?msq=1262
I have attached the signal being used to run the ECU. Please help me understand why it is making me suffer .......
My plan here is get it to work on the bench firts then the car.
Can anyone see where I am going wrong?
Regards
Ray