anything ETB on bench first suspect is power supply which is unable to produce enough amperage, sometimes 5A is needed. please provide a photo of your power supply
I will double check if instructions cover bias curve validation. Please set p=i=d=0 and move pedal, some vaguely reasonable movements expected from etb
Re: Calibrate Electronic Throttle Body
Posted: Wed Feb 08, 2023 3:45 pm
by SerValentinov
Rattles in place
Re: Calibrate Electronic Throttle Body
Posted: Wed Feb 08, 2023 3:46 pm
by AndreyB
I will attempt making a reference p=i=d=0 video on the weekend
Re: Calibrate Electronic Throttle Body
Posted: Tue Feb 14, 2023 2:25 am
by AndreyB
Re: Calibrate Electronic Throttle Body
Posted: Sat Feb 18, 2023 10:24 am
by SerValentinov
SOS Hello!
(when i manually unscrew the damper by 98% it start to react correctly.)
Re: Calibrate Electronic Throttle Body
Posted: Sat Feb 18, 2023 2:58 pm
by AndreyB
C'mon, red blinking indicator clearly tells you that your TPS calibration is incorrect. Until you get TPS calibration right you are not in the position to control it reliably.