microRusEFI 12v high side output?

Post Reply
MadGoatCustoms
Posts: 31
Joined: Thu Feb 24, 2022 12:47 pm

microRusEFI 12v high side output?

Post by MadGoatCustoms »

I need a 12v output to control my fuel pump relay. I have microRusEFI v0.5.4. I found JP2 for switching high side level from 5v to 12v. What else needs to be done?
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: microRusEFI 12v high side output?

Post by AndreyB »

You should be good for low current relay control, not direct pump control.
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
MadGoatCustoms
Posts: 31
Joined: Thu Feb 24, 2022 12:47 pm

Re: microRusEFI 12v high side output?

Post by MadGoatCustoms »

Yes, it is working now. So JP2 setting affects all GP outputs 1 thru 6? Ignition outputs are always 5v regardless, correct?
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: microRusEFI 12v high side output?

Post by AndreyB »

I believe that JP2 only affects two outputs
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: microRusEFI 12v high side output?

Post by AndreyB »

AndreyB wrote:
Mon Feb 13, 2023 3:24 pm
I believe that JP2 only affects two outputs
yep, exactly like https://rusefi.com/docs/pinouts/microrusefi/ spells it out
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
MadGoatCustoms
Posts: 31
Joined: Thu Feb 24, 2022 12:47 pm

Re: microRusEFI 12v high side output?

Post by MadGoatCustoms »

Thanks for that pinout diagram, in all my searching I never saw that, I've been going by the one on github which doesn't say anything about which pins are high low or push-pull.
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: microRusEFI 12v high side output?

Post by AndreyB »

Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
MadGoatCustoms
Posts: 31
Joined: Thu Feb 24, 2022 12:47 pm

Re: microRusEFI 12v high side output?

Post by MadGoatCustoms »

This is the pinout I have been using https://github.com/rusefi/rusefi/wiki/Hardware-microRusEFI-wiring
The problem is that it doesn't name the output types. It describes the different types of outputs, and says which pins are outputs, but it doesn't say which pin is what type (gp_low vs gp_high), they are all just called GP. It's not wrong, it's just incomplete.
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: microRusEFI 12v high side output?

Post by AndreyB »

Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Post Reply