Subaru Pedal Error

[Renegade]

Hello, I'm new to rusEFI, I got the uaEFI and trying to setup ETB and Pedal using a 2008 Subaru STi ETB and Pedal cant seem to get it working, wired the pedal correctly running into pedal error, when the pedal is fully depressed, the throttle pedal position gauge hits 100% and back to 0% immediately, the Raw pedal primary and Raw pedal secondary increase voltage as I depress the pedal. Attaching a log.

Thanks!

[AndreyB]

https://github.com/rusefi/rusefi/wiki/rusEFI-Quick-Start-PDF#make-it-yours
https://github.com/rusefi/rusefi/wiki/rusEFI-Quick-Start-PDF#share-it
https://github.com/rusefi/rusefi/wiki/HOWTO-upload-tune
https://github.com/rusefi/rusefi/wiki/HOWTO-upload-log

[Renegade]

Link to Log https://rusefi.com/online/view.php?log=1353
Link to Tune https://rusefi.com/online/view.php?msq=1615

Thanks.

[AndreyB]

With settings like that do you by any change get any errors? Because you are not mentioning any errors?

There is a slightly hidden option which could help in your case of a subaru pedal

image.png (3.05 KiB) Viewed 485 times