Hello,
I would like to know how to tune the ETB bias curve.
From what I thing would work would be to set the controller into open-loop mode and set a specific duty cycle and check the TPS value to which it corresponds.
ETB Bias curve tunning
-
AndreyB
- Site Admin
- Posts: 14334
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: ETB Bias curve tunning
Open loop would be closed loop with p=i=d=0?
Looks like second step would be to set complete bias duty to different runs of same values across complete curve and see how things go? I expect a bit of randomness.
Try complete curve set to -20
Try complete curve set to -10
Try complete curve set to +10
Try complete curve set to +15
Looks like second step would be to set complete bias duty to different runs of same values across complete curve and see how things go? I expect a bit of randomness.
Try complete curve set to -20
Try complete curve set to -10
Try complete curve set to +10
Try complete curve set to +15
- image.png (13.12 KiB) Viewed 357 times
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute