Hellen 128 question m113 5.0

This means Hellen
Post Reply
zlatko
Posts: 1
Joined: Sun Mar 13, 2022 7:37 pm

Hellen 128 question m113 5.0

Post by zlatko »

Hello, I have m113 5.0 306hp and want to make it run with manual trans... So my question is can the hellen128 become with software or I need to make it myself via TunerStudio. Does the ecu become assembled or I have to solder all components myself? Best Regards!
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Hellen 128 question m113 5.0

Post by AndreyB »

ECU comes assembled and with software

ECU comes without calibrations specific to your m113 5.0 engine, you would need to hire a tuner/dyno shop to calibrate the ECU.
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
User avatar
md_sanci
Posts: 69
Joined: Thu May 30, 2019 6:13 am
Location: Romania
Github Username: shadowm60
Slack: Alex M
Contact:

Re: Hellen 128 question m113 5.0

Post by md_sanci »

Did you checked if you have 128 pin car connector?

You do have to make engine calibration after you installed hellen in the car, i can support with the make it run part, but final calibration would make sens to do it on a dyno.

Sent from my SM-A528B using Tapatalk

Post Reply