Hellen64 revb 91Miata VSS

This means Hellen
Post Reply
User avatar
Kristian
Posts: 12
Joined: Sat Apr 09, 2022 10:34 pm
Location: New Xiland

Hellen64 revb 91Miata VSS

Post by Kristian »

Hi, I've wired up temp VSS signal from the dash. I have confirmed that the dash output is 5 volts when high, and 0 volts when low, and that it switches state as the car moves. I have hooked the wire up to 1M, VSS input, I have configured tuner studio to use 1M as VSS input, but I cannot see a vehicle speed reading on the data logs. I've looked at the spaghetti diagram and I can see an input called VSS IN, connected to P33. I can see the pull up resistors R20 and R23, but if I test between these resistors (in particular R32) and P33, I read some 14K Ohms. should this be less or am I misunderstanding the design? Do I need to run a link between P33 and R32 to get VSS to work?
Thanks in advance.
Attachments
Hellen64 Maita 91-94 revb
Hellen64 Maita 91-94 revb
hellen64na6-b.jpeg (2.54 MiB) Viewed 10066 times
Screenshot of the spaghetti diagram
Screenshot of the spaghetti diagram
aaabbc.jpeg (177.09 KiB) Viewed 10066 times
1991 1.6 Mazda Eunos Roadster, 5sp, Normally Aspirated
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Hellen64 revb 91Miata VSS

Post by AndreyB »

Just made an improvement in the firmware - at least we will have VSS front event counter https://github.com/rusefi/rusefi/issues/4173

But did not have a chance to test it so far :(
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
BeerMoneyMotorsports
Posts: 151
Joined: Thu Jan 14, 2021 10:16 pm

Re: Hellen64 revb 91Miata VSS

Post by BeerMoneyMotorsports »

Ill update tomorrow with needed jumper for vss
User avatar
Kristian
Posts: 12
Joined: Sat Apr 09, 2022 10:34 pm
Location: New Xiland

Re: Hellen64 revb 91Miata VSS

Post by Kristian »

Thanks
1991 1.6 Mazda Eunos Roadster, 5sp, Normally Aspirated
BeerMoneyMotorsports
Posts: 151
Joined: Thu Jan 14, 2021 10:16 pm

Re: Hellen64 revb 91Miata VSS

Post by BeerMoneyMotorsports »

Sorry for the delay. Remove r20 and jumper to p33. VSS circuit already has the pullup, so r23 can be completely bypassed.
Attachments
020068BD-07F2-451D-911C-7F454B806C2E.jpeg
020068BD-07F2-451D-911C-7F454B806C2E.jpeg (404.76 KiB) Viewed 9980 times
User avatar
Kristian
Posts: 12
Joined: Sat Apr 09, 2022 10:34 pm
Location: New Xiland

Re: Hellen64 revb 91Miata VSS

Post by Kristian »

thanks
1991 1.6 Mazda Eunos Roadster, 5sp, Normally Aspirated
Post Reply