Hallo from Germany

ItaloManyak · Post by **ItaloManyak** » Mon Oct 24, 2016 5:45 pm

Do not reinvent the wheel!
you need to set everything as 2.2T AAN engine.
and Turbo too

I have 2.2T (ADU) for a long time.
built 7A engine turbine.
If you do not push the boost greater than 1 bar all will work in the stock motor

Horsty · Post by **Horsty** » Thu Jan 26, 2017 2:10 pm

i'm finally working on my ecu build again.

am i right that i can use the tc4427 for the injectors switching ground on inverting mode in tunerstudio?

Post by **AndreyB** » Thu Jan 26, 2017 3:20 pm

Horsty wrote:am i right that i can use the tc4427 for the injectors switching ground on inverting mode in tunerstudio?

Horsty · Post by **Horsty** » Thu Jan 26, 2017 3:41 pm

thanks. didn't read that thread properly.. .

edit: just ordered some VNP14NV04-E.

rusefi.com