Basic / Trigger setting problem - little bit confused

Your chance to introduce yourself and your vehicle
User avatar
darxfame
contributor
contributor
Posts: 259
Joined: Mon Feb 13, 2017 10:06 pm
Location: Moscow

Re: Basic / Trigger setting problem - little bit confused

Post by darxfame »

JRD McLAREN wrote:
Thu Mar 14, 2019 8:00 pm
VW 1.8T 20Valve Crank ...
..and same 60/2 trigger wheel as my ...

..and many others ...
Can you send me the part number of your sensor? Maybe you can start with my settings(but no use my pin settings, i have another board)
i have crank vr sensor https://avtopasker.ru/goods/7537 and cam hall sensor. https://www.avtoall.ru/datchik_fazy_vaz_2110_2111_8v_daewoo_lanos_aenk_k-080367/
trigger.jpg
trigger.jpg (114.31 KiB) Viewed 19149 times
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: Basic / Trigger setting problem - little bit confused

Post by JRD McLAREN »

russian wrote:
Fri Mar 15, 2019 3:42 am
I am starting to think that you might be right here...
Part of the challenge is that I never had a 60/2 VR in my life. @ is the only 60/2 not far from me and that's why I called it VW, he has a VW :)
Let me ask @ and @ to comment on this since they both run 60/2 and they could be affected by all this. I guess they are OKish since they use "use only rising edge" at which point both shapes look the same?
Look at this picture ....

Image
.. some Proteus and microRusEFI for sale in Europe ..
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: Basic / Trigger setting problem - little bit confused

Post by JRD McLAREN »

darxfame wrote:
Fri Mar 15, 2019 4:29 am
Can you send me the part number of your sensor? Maybe you can start with my settings(but no use my pin settings, i have another board)
i have crank vr sensor https://avtopasker.ru/goods/7537 and cam hall sensor. https://www.avtoall.ru/datchik_fazy_vaz_2110_2111_8v_daewoo_lanos_aenk_k-080367/
trigger.jpg
I have many sensors, ..
Old original one but still working is BOSCH 0 261 210 030
Now I have VR from Daewoo / Chevrolet Lacetti OE: 96253542 or 25182450
My sensors works fine ... ;)

Your engine work on full sequential mode ..?? (2x360deg rotation /720deg)
or on wasted / batch mode .. ?? (1x360deg rotation) ..
.. cause I see " 4 stroke without cam sensor " . ...
.. some Proteus and microRusEFI for sale in Europe ..
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Basic / Trigger setting problem - little bit confused

Post by AndreyB »

Just added
rusEfi trigger configuration is the most confusing part of rusEfi configuration unfortunately.

If rusEfi does not know your exact overall trigger shape and you use composite setup with crank sensor driving RPM and single tooth cam sensor providing phase information, that's considered "4 stroke without cam with VVT". Even if you do not have VVT :(
to https://rusefi.com/wiki/index.php?title=Manual:Software:VVT
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: Basic / Trigger setting problem - little bit confused

Post by JRD McLAREN »

..Wow .. OK ...
..
this setup in rusefi is totally differnet from all others ecu, which I have ... :)

So now I look at Abricos engine, and he has old VW 2.0 litre 8Valve engine,
and this engine has same 60-2 tr.wheel as my.. on VR sensor.

but, Thanks for advice.
.. some Proteus and microRusEFI for sale in Europe ..
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Basic / Trigger setting problem - little bit confused

Post by AndreyB »

JRD McLAREN wrote:
Fri Mar 15, 2019 12:41 pm
..Wow .. OK ...
..
this setup in rusefi is totally differnet from all others ecu, which I have ... :)
I am aware of the problem but I do not have a better layout for the configuration dialog at the moment :(
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: Basic / Trigger setting problem - little bit confused

Post by JRD McLAREN »

...make some "CHECKBOX" .. for CAM sensor .. maybe ..??
...

But, I's OK at this moment...

My engine run, and is not problem to make some tests with CAM an CRANK configurations. :)
.. some Proteus and microRusEFI for sale in Europe ..
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Basic / Trigger setting problem - little bit confused

Post by AndreyB »

JRD McLAREN wrote:
Fri Mar 15, 2019 12:47 pm
...make some "CHECKBOX" .. for CAM sensor .. maybe ..??
Please confirm that you have a complete solution not just "sure it must be easy just add a checkbox" :)
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: Basic / Trigger setting problem - little bit confused

Post by JRD McLAREN »

OK ..

but, I have not to much time for it at this time ...
I'll give you a feedback. ...
.. some Proteus and microRusEFI for sale in Europe ..
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Basic / Trigger setting problem - little bit confused

Post by AndreyB »

JRD McLAREN wrote:
Fri Mar 15, 2019 12:55 pm
but, I have not to much time for it at this time ...
Once you have time please suggest a complete solution which would work for all configurations
2 stroke and 4 stroke
well-defined shapes and composite shapes
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: Basic / Trigger setting problem - little bit confused

Post by JRD McLAREN »

.. 2 stroke engine not require CAM sensor, they don't have CAM .. in most setups ....
(except Detroit Diesel for example .. )

..(and I'm not good programmer ... :( ) ..
.. some Proteus and microRusEFI for sale in Europe ..
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: Basic / Trigger setting problem - little bit confused

Post by JRD McLAREN »

one POSITIVE UPDATE ...

IT RUN ... in SEQUENTIAL MODE ...

Trigger type - 60/2 VW
Operation mode - 4stroke without cam sensor
Use only rising edge - false
VVT mode - Second half

Thanks for all ... for advice..

..and sorry for my stupid questions ... :mrgreen:
Attachments
2019-03-15_16_29_52rpm_0_maf_0.0.png
2019-03-15_16_29_52rpm_0_maf_0.0.png (50.46 KiB) Viewed 19107 times
2019-03-15_16_29_33rpm_0_maf_0.0.png
2019-03-15_16_29_33rpm_0_maf_0.0.png (26.82 KiB) Viewed 19107 times
.. some Proteus and microRusEFI for sale in Europe ..
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Basic / Trigger setting problem - little bit confused

Post by AndreyB »

We need a video and a picture of the board! :)

These are not stupid questions, we need to make this less confusing. Actually a very small change which would help a bit could be to rename

"4 stroke with cam sensor" into "4 stroke with well-know cam sensor position"
"4 stroke without cam sensor" into "4 stroke without cam sensor or with unclear can sensor position"

Does it makes sense? Can you propose a better wording?
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: Basic / Trigger setting problem - little bit confused

Post by JRD McLAREN »

It will be OK ... (for me)
I have no idea, how is defined cam and crank in current rusefi source ...
..at this moment ...

and try to "fix" this one .. also ..
JRD McLAREN wrote:
Thu Mar 14, 2019 7:46 pm
I'm think, the right name for your trigger wheel templates are:

60/2 with Hall sensor (60/2)
60/2 with VR sensor (60/2 VW)
"STOP button" is great feature also ... .. as your Engine sniffer .. ;)

If you can see any other trigger wheel templates, try download this: https://imfsoft.com/files/master/software/FIRMWARE_FPGAV8_43_CPUV8_44.zip

Thanks ... for your time ..again ...
.. some Proteus and microRusEFI for sale in Europe ..
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Basic / Trigger setting problem - little bit confused

Post by AndreyB »

60/2 with Hall sensor (60/2) - is there such a thing in reality?
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: Basic / Trigger setting problem - little bit confused

Post by JRD McLAREN »

this picture
https://rusefi.com/images/triggers/trigger_8.png
looks like standard BOSCH 60-2 wheel, read by HALL sensor ...
..it may be inverted, for some kind / type of HALL sensors ...

and this one
https://rusefi.com/images/triggers/trigger_20.png
looks like BOSCH 60-2 wheel, read and decoded by VR sensor + LM1815 or MAX9924 - 7

..as I wrote above ...
.. some Proteus and microRusEFI for sale in Europe ..
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Basic / Trigger setting problem - little bit confused

Post by AndreyB »

Appreciate your input, this is now part of https://github.com/rusefi/rusefi/issues/707
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: Basic / Trigger setting problem - little bit confused

Post by JRD McLAREN »

russian wrote:
Fri Mar 15, 2019 5:36 pm
60/2 with Hall sensor (60/2) - is there such a thing in reality?
...some OPEL / Vauxhall car have HALL sensor on crank ...
...and some new VWAG have this combination ..
...and some users can have they own sensor and wheel combination ..
DSC_0385 (1024x576).jpg
DSC_0385 (1024x576).jpg (341.93 KiB) Viewed 19090 times
Last edited by JRD McLAREN on Fri Mar 15, 2019 7:25 pm, edited 1 time in total.
.. some Proteus and microRusEFI for sale in Europe ..
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Basic / Trigger setting problem - little bit confused

Post by AndreyB »

How many narrow red logic output VR tooth are there and how many wide red logic output VR tooth? 57 narrow + one wide?

Obviously 58 narrow and zero wide in real life physical wheel and same 58 narrow and zero wide on Hall logic output signal I hope?
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: Basic / Trigger setting problem - little bit confused

Post by JRD McLAREN »

Yes, you right ..
It is 57 narrow + 1 wide

In VR decoded logic is +1 wide tooth ...
Full scope of raw VR is on this picture https://rusefi.com/forum/download/file.php?id=4416

It is from my 60-2 trig. wheel .. on VR
Last edited by JRD McLAREN on Fri Mar 15, 2019 7:52 pm, edited 1 time in total.
.. some Proteus and microRusEFI for sale in Europe ..
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: Basic / Trigger setting problem - little bit confused

Post by JRD McLAREN »

..we talking about this ..
Attachments
trigger_20mark.png
trigger_20mark.png (28.81 KiB) Viewed 19084 times
.. some Proteus and microRusEFI for sale in Europe ..
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Basic / Trigger setting problem - little bit confused

Post by AndreyB »

Yes, the above issue is work in progress.
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: Basic / Trigger setting problem - little bit confused

Post by JRD McLAREN »

4 Metal = real trigger wheel shape - green color
3 Hall = no Hall signal on the picture
2 VR = black "line" is the raw signal from VR sensor recorded on scope ..

Green one = is TTL signal coming out from MAX9926 (or any other vr controloer)

"zero crossing" are signal edges ...
(zero aka 0 have grey color)
Last edited by JRD McLAREN on Fri Mar 15, 2019 8:10 pm, edited 1 time in total.
.. some Proteus and microRusEFI for sale in Europe ..
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Basic / Trigger setting problem - little bit confused

Post by AndreyB »

Please join slack see https://rusefi.com/forum/viewtopic.php?f=13&t=1198 for details
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
ZHoob2004
contributor
contributor
Posts: 153
Joined: Sun Apr 03, 2016 7:11 pm
Location: Tucson, AZ

Re: Basic / Trigger setting problem - little bit confused

Post by ZHoob2004 »

How many RPM is this being tested at? Could this be another case of the max8266 MAX9926 automatic gain issue?
Last edited by ZHoob2004 on Fri Mar 15, 2019 9:45 pm, edited 1 time in total.
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: Basic / Trigger setting problem - little bit confused

Post by JRD McLAREN »

VR scope graph is recorded at "starter" .. 120-150 rpm aprox.
Could this be another case of the max8266 automatic gain issue?
what do you mean ..?? spikes ..?? or "different tooth readings" .. ??
.. some Proteus and microRusEFI for sale in Europe ..
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Basic / Trigger setting problem - little bit confused

Post by AndreyB »

Thank you! I will now edit history a bit to reduce confusion
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
ZHoob2004
contributor
contributor
Posts: 153
Joined: Sun Apr 03, 2016 7:11 pm
Location: Tucson, AZ

Re: Basic / Trigger setting problem - little bit confused

Post by ZHoob2004 »

JRD McLAREN wrote:
Fri Mar 15, 2019 9:08 pm
Could this be another case of the max8266 automatic gain issue?
what do you mean ..?? spikes ..?? or "different tooth readings" .. ??
Never mind, I did the math and I believe you would have to be turning at less than 12RPM for that feature to become a problem. More of an issue for extremely low tooth counts I guess.
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Basic / Trigger setting problem - little bit confused

Post by AndreyB »

JRD McLAREN wrote:
Fri Mar 15, 2019 9:08 pm
what do you mean ..??
MAX9926 has some watchdog at 80 or 85ms, this is becoming an issue during cranking if you have very few tooth on your trigger.
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: Basic / Trigger setting problem - little bit confused

Post by JRD McLAREN »

..Oh ..
I know what Zhoob2004 mean with this context ...

If we have less than 12 tooth on trigger wheel, then HALL sensor is better to use ..
otherside..
If we have 58 and use HALL, then we can have problem on high rpm...
( "old hall" / type of sensors are slow )
.. some Proteus and microRusEFI for sale in Europe ..
Post Reply