[README] Beginner Video Guides

Post Reply
Old Grey
contributor
contributor
Posts: 85
Joined: Thu Apr 07, 2016 10:20 pm
Location: AUS Sydney 2200

Beginner Video Guides

Post by Old Grey »

I better clump these here so people can find the guides easier.

RusEFI ECU #1 : Getting Started - Firmware


RusEFI - SIMulator


RusEFI - STIMulator
Last edited by Old Grey on Mon Jun 17, 2019 8:45 am, edited 3 times in total.
Old Grey
contributor
contributor
Posts: 85
Joined: Thu Apr 07, 2016 10:20 pm
Location: AUS Sydney 2200

Re: Beginner Video Guides

Post by Old Grey »

FRANKENSTEIN - Hand soldering Frankenstein.
RusEFI Frankenstein 1 - Soldering Basics


RusEFI Frankenstein 2 - Soldering Frankenstein


RusEFI Frankenstein 3 - Soldering Frankenstein


RusEFI Frankenstein 4 - Soldering Frankenstein


RusEFI Frankenstein 5 - Critical Inspection


FRANKENSO - Stencil and oven soldering Frankenso.
I made numerous mistakes when doing these videos, so watch the next video for the corrections before you do any of these instructions.
rusEFI Frankenso 1 - Soldering - Bottom Prep


rusEFI Frankenso 2 - Soldering Bottom


rusEFI Frankenso 3a - Soldering - Front Prep 1


rusEFI Frankenso 3b - Soldering - Front Prep 2


rusEFI Frankenso 4 - Soldering Front


rusEFI Frankenso 5 - Soldering THT


rusEFI Frankenso 6 - Critical Inspection
Last edited by Old Grey on Sun Dec 01, 2019 8:19 pm, edited 11 times in total.
Old Grey
contributor
contributor
Posts: 85
Joined: Thu Apr 07, 2016 10:20 pm
Location: AUS Sydney 2200

Re: Beginner Video Guides

Post by Old Grey »

This is kind-of a tutorial on how to do a Frankenstein from plans, but done in the style of a "reaction" video. Basically lots of BS intermingled in the info.

Imbecile Vs RusEFI 1 - The Wreckoning


Imbecile Vs RusEFI 2 - Wreckoning Harder


Imbecile Vs RusEFI 3 - To Wreckon, or Not to Wreckon


Imbecile Vs RusEFI 4 - The Wreckoning is Over


Imbecile Vs RusEFI 5 - Wreckoning there is No, only Do or Do Not.


Imbecile Vs RusEFI 6 - I Wreckon So


Imbecile Vs RusEFI 7 - Frankenso Unboxing


Imbecile Vs RusEFI 8 - Frankenso SMD planing


Imbecile Vs RusEFI 9 - I wreakon it will work


Imbecile Vs RusEFI 10 - Frankenso soldering redux


Imbecile Vs RusEFI 11 - Frankenso soldering redux2
Last edited by Old Grey on Mon Sep 09, 2019 12:02 pm, edited 6 times in total.
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Beginner Video Guides

Post by AndreyB »

This post is now sticky, it would always be on top hopefully it's OK.

WOW, very valuable material :) Thank you for your contribution!
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
User avatar
kb1gtt
contributor
contributor
Posts: 3758
Joined: Tue Sep 10, 2013 1:42 am
Location: ME of USA

Re: Beginner Video Guides

Post by kb1gtt »

Yes very cool and thanks for putting in the effort on the video's. One suggestion that might make them even better is to add notes. As an example, for this video https://www.youtube.com/watch?v=izhxVPfNxu4&feature=youtu.be notes like this would be cool.
0:0 Introduction to simulator --> download --> open simulator --> simulator basics
1:48 inspect VE table data --> tips about RPM limited by threshold
2:38 sensory inputs (coolant temperature) --> gauge manipulations --> tips about warnings
4:04 Diagnostics via "messages" tab
5:13 Connecting Sim to TS --> Firmware archive https://sourceforge.net/p/rusefi/code/HEAD/tree/firmware_archive/
5:57 Virtual serial port install --> open files from the rusEFI bundle
6:24 firewall / antivirus notes --> Open virtual serial port
7:22 Start TunerStudio (TS) --> Change coolant temperature and RPM in Sim and see it in TS
8:58 Change engine parameters in TS see them change in Sim.
9:27 Connection problem diagnostics Telnet and similar tips. "telnet localhost 29001" then "telnet localhost 29002"

Perhaps this sticky thread could include the videos, while comments like this post could be in another thread. AKA perhaps this can be a handy place for educational purposes. Or perhaps the above list should be included in the wiki.... Any how I feel my comments are handy for developers and less handy for the desired end user.
Welcome to the friendlier side of internet crazy :)
cyrille
Posts: 21
Joined: Sun Jul 02, 2017 8:37 am

Re: Beginner Video Guides

Post by cyrille »

thank you very much for these videos
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Beginner Video Guides

Post by AndreyB »

media embedding seems to be fixed now?
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Old Grey
contributor
contributor
Posts: 85
Joined: Thu Apr 07, 2016 10:20 pm
Location: AUS Sydney 2200

Re: Beginner Video Guides

Post by Old Grey »

kb1gtt wrote:
Mon May 13, 2019 9:57 am
Perhaps this sticky thread could include the videos, while comments like this post could be in another thread. AKA perhaps this can be a handy place for educational purposes. Or perhaps the above list should be included in the wiki.... Any how I feel my comments are handy for developers and less handy for the desired end user.
You're good at notes, any chance you can do some ;) You're better than I would ever be.

You can put them as a comment on the vid and I can pin them, and that way everyone sees it first. I put your notes on the SIM video and it looks pretty good.
User avatar
kb1gtt
contributor
contributor
Posts: 3758
Joined: Tue Sep 10, 2013 1:42 am
Location: ME of USA

Re: Beginner Video Guides

Post by kb1gtt »

I would love to try the notes / comments. The problem is that I have normal life constraints, which mean I have a lack of time. Lately it's been hard to read the forums and slack :( I'll keep it in mind that you would like then. I'm a skeptic that I'll find the time :(
Welcome to the friendlier side of internet crazy :)
Post Reply