Hello from Spain!
Posted: Tue Dec 03, 2019 3:20 pm
Hello everybody! I'm glad to be on this community and hope to contribute on this project.
I'm working on a small 2T(two stroke) engine and I have tried few injector (chinese ones) and the curve of pulse width vs flow ml/min tends to not be a linear one.
I have used the frankesco board and Keihin and still dooing the same.
On the next images there are three graphs of different injectors where in the X axis we have the PW and in the Y axis we have the flow ml/min.
Image1 Image 2 Image 3
However , I have seen that Ms3 have and option in tuner studio called non-linear small pulsewidths like in the next picture
I don't know if Rusefi has that feature,If not I would like to implement some injector tables to improve the non-linear behavior of the injectors. So I will need your advices and help to do it .
Also I have seen some ticket on source forge https://sourceforge.net/p/rusefi/tickets/269/.
I'm working on a small 2T(two stroke) engine and I have tried few injector (chinese ones) and the curve of pulse width vs flow ml/min tends to not be a linear one.
I have used the frankesco board and Keihin and still dooing the same.
On the next images there are three graphs of different injectors where in the X axis we have the PW and in the Y axis we have the flow ml/min.
Image1 Image 2 Image 3
However , I have seen that Ms3 have and option in tuner studio called non-linear small pulsewidths like in the next picture
I don't know if Rusefi has that feature,If not I would like to implement some injector tables to improve the non-linear behavior of the injectors. So I will need your advices and help to do it .
Also I have seen some ticket on source forge https://sourceforge.net/p/rusefi/tickets/269/.