Hello from Spain!

Your chance to introduce yourself and your vehicle
Post Reply
JuanEduardo
Posts: 1
Joined: Mon Nov 25, 2019 3:53 pm

Hello from Spain!

Post by JuanEduardo »

Hello everybody! I'm glad to be on this community and hope to contribute on this project.
:D :D :D



I'm working on a small 2T(two stroke) engine and I have tried few injector (chinese ones) and the curve of pulse width vs flow ml/min tends to not be a linear one.
I have used the frankesco board and Keihin and still dooing the same.

On the next images there are three graphs of different injectors where in the X axis we have the PW and in the Y axis we have the flow ml/min.
marcosgsxr.PNG
marcosgsxr.PNG (22.48 KiB) Viewed 5599 times
Image1
Captura.PNG
Captura.PNG (21.88 KiB) Viewed 5599 times
Image 2
30g_injector.PNG
30g_injector.PNG (25.87 KiB) Viewed 5599 times
Image 3



However , I have seen that Ms3 have and option in tuner studio called non-linear small pulsewidths like in the next picture

30g_injector.PNG
30g_injector.PNG (25.87 KiB) Viewed 5599 times
I don't know if Rusefi has that feature,If not I would like to implement some injector tables to improve the non-linear behavior of the injectors. So I will need your advices and help to do it :D .

Also I have seen some ticket on source forge https://sourceforge.net/p/rusefi/tickets/269/.
Attachments
tables.png
tables.png (411.21 KiB) Viewed 5598 times
Last edited by JuanEduardo on Wed Dec 04, 2019 8:59 am, edited 3 times in total.
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Hello from Spain!

Post by AndreyB »

Welcome!
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Hello from Spain!

Post by AndreyB »

JuanEduardo wrote:
Tue Dec 03, 2019 3:20 pm
I don't know if Rusefi has that feature,If not I would like to implement some injector tables to improve the non-linear behavior of the injectors. So I will need your advices and help to do it :D .
rusEfi does not have such injector tables, someone would have to implement those if desired.
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
User avatar
kb1gtt
contributor
contributor
Posts: 3758
Joined: Tue Sep 10, 2013 1:42 am
Location: ME of USA

Re: Hello from Spain!

Post by kb1gtt »

I believe your tuned fuel table typically compensates for this kind of issue as well as the table compensates for many other issues. I suspect you will not see much of a performance difference on a table driver design. If we get around to doing model based calculations instead of table based calculations this injector linearization would be quite helpful.
Welcome to the friendlier side of internet crazy :)
mck1117
running engine in first post
running engine in first post
Posts: 1493
Joined: Mon Jan 30, 2017 2:05 am
Location: Seattle-ish

Re: Hello from Spain!

Post by mck1117 »

Are those tables the pulse width vs. flow rate, or the pulse width vs. the fuel QUANTITY per pulse? Because to me, they look like quantity per pulse. I don't know of any injectors that flow fuel more quickly if you open them for longer.
Post Reply