Hello!
I'm new to the DIY ECUs but not on car electronics and pcb manufacturing.
I'm want to develop a plug n play ECU for my 95 Mustang GT (5.0, TFI ignition) and then later for my 95 Mustang v6 (3.8, EDIS-6).
I've searched around but couldn't find much information about support for these ignition systems. Can anyone point me to the right direction?
I'm willing to exchange my PCB layout and manufacturing knowledge for some tips or software improvements!
Thanks in advance.
rusEFI and a 95 Mustang
-
- running engine in first post
- Posts: 1494
- Joined: Mon Jan 30, 2017 2:05 am
- Location: Seattle-ish
Re: rusEFI and a 95 Mustang
There's some talk in here about TFI:
https://rusefi.com/forum/viewtopic.php?t=1890
https://rusefi.com/forum/viewtopic.php?t=1890
- AndreyB
- Site Admin
- Posts: 14347
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: rusEFI and a 95 Mustang
https://rusefi.com/forum/viewtopic.php?p=39595#p39595 could be relevant. Another option is to make an adapter for Proteus. Someone please post public adapters for Proteus?
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Re: rusEFI and a 95 Mustang
I'm actually working on this exact problem. I'm using an adapter board based off Proteus and it's completely plug and play. https://rusefi.com/forum/viewtopic.php?f=2&t=1890&start=150ghpg2 wrote: ↑Fri Feb 05, 2021 12:00 amHello!
I'm new to the DIY ECUs but not on car electronics and pcb manufacturing.
I'm want to develop a plug n play ECU for my 95 Mustang GT (5.0, TFI ignition) and then later for my 95 Mustang v6 (3.8, EDIS-6).
I've searched around but couldn't find much information about support for these ignition systems. Can anyone point me to the right direction?
I'm willing to exchange my PCB layout and manufacturing knowledge for some tips or software improvements!
Thanks in advance.
The boards should be here in about a week and I'll be working with the software guys to hopefully add the tfi waveform but this could take a bit of time. Once I get things tested and running I'll have them for sale.