rusefi.com

Hello New people. I'm here to learn where I lack the most in automotive modification. I'm good at welding, machining, painting, fabrication, or basically anything but electronics and all parts of such.
I own a few cars 2000 Civic EJ8, a 1989 Toyota MR2 AW11, and a 2001 Toyota MR2 ZZW30.

-Goals are to fit a Proteus v0.5 in the ZZW30 controlling a 2ARFE that I hope to develop to a very high power to later swap into the civic and make AWD using a lot of Toyota running gear.

Welcome!

See also https://github.com/rusefi/rusefi/wiki/Mission-Statement and https://github.com/rusefi/rusefi/wiki/ in general

What is the best way to get ahold of a Proteus v0.5 w/o the connectors soldered on. I'd really like to start at the board on my project cause it intrigues me the most at this time.

i would recommend DMing mck1117 once you locate relevant for sale post on Proteus thread here