Page 1 of 1

Jaguar VEE 12 XJS and Proteus

Posted: Thu May 13, 2021 10:33 pm
by bill
JAGUAR VEE 12 1989 and Proteus coming up...

first pics
IMG_20210510_135541730_HDR.jpg
IMG_20210510_135541730_HDR.jpg (3.35 MiB) Viewed 9206 times
IMG_20210510_135458549.jpg
IMG_20210510_135458549.jpg (3.6 MiB) Viewed 9206 times
IMG_20210510_135832874.jpg
IMG_20210510_135832874.jpg (2.35 MiB) Viewed 9206 times
IMG_4006.jpeg
IMG_4006.jpeg (3.36 MiB) Viewed 9206 times

Re: Jaguar VEE 12 XJS and Proteus

Posted: Thu May 13, 2021 10:38 pm
by bill
stripping out the B-A-D
IMG_20210513_111249312_HDR.jpg
IMG_20210513_111249312_HDR.jpg (790.82 KiB) Viewed 9205 times
IMG_3996.jpeg
IMG_3996.jpeg (2.57 MiB) Viewed 9205 times

Re: Jaguar VEE 12 XJS and Proteus

Posted: Fri May 14, 2021 12:12 am
by mck1117
what's your trigger input plan?

Re: Jaguar VEE 12 XJS and Proteus

Posted: Fri May 14, 2021 1:05 am
by AndreyB
stock ecu has a funny number of wires like 32 pi connector?

Re: Jaguar VEE 12 XJS and Proteus

Posted: Fri May 14, 2021 7:14 pm
by DereksDaimler
I thought this may help its the stock ECU wiring Diagram just verify the number on the casing 16CU vs 8 CU

Re: Jaguar VEE 12 XJS and Proteus

Posted: Fri May 14, 2021 8:10 pm
by bill
AndreyB wrote:
Fri May 14, 2021 1:05 am
stock ecu has a funny number of wires like 32 pi connector?
BHAHAHHA
stock ecu is long gone....
pretty much everything is long gone...
and i have torn out the last bit of wiring for the engine...

its a virgin birth!

Re: Jaguar VEE 12 XJS and Proteus

Posted: Fri May 14, 2021 8:12 pm
by bill
mck1117 wrote:
Fri May 14, 2021 12:12 am
what's your trigger input plan?
a guy online has a layout for a hall sensor...
but i am open for suggestions...
what do you guys want to do??

Re: Jaguar VEE 12 XJS and Proteus

Posted: Fri May 14, 2021 8:20 pm
by bill
soooo...
i have,
2 throttle bodies (71 mm, same as the hole in the manifold... the old throttle bodies were 60mm, so an upgrade from stock)
2 coil packs
and some spark wires
all from 2
2011 chevy impala flex fuel v6
VIN: 2G1WA5EKXB1226688 and VIN: 2G1WF5EK4B1132002
and
1 bosch TMAP from VW
IMG_20210514_145954363.jpg
IMG_20210514_145954363.jpg (771.94 KiB) Viewed 9159 times
IMG_20210514_121724.jpg
IMG_20210514_121724.jpg (359.9 KiB) Viewed 9159 times

Re: Jaguar VEE 12 XJS and Proteus

Posted: Thu May 20, 2021 5:48 pm
by bill
i grabbed some injectors from 2 BMW's --
325i
and 2000 BMW 528I --- VIN: WBADM6343YGV03920

the bosch EV1 injectors fit, the chevy do not

drilled the holes in the GM throttle body, and it fits okay now
IMG_20210520_102304152.jpg
IMG_20210520_102304152.jpg (1.36 MiB) Viewed 9076 times
IMG_20210519_093445154.jpg
IMG_20210519_093445154.jpg (2.52 MiB) Viewed 9076 times
IMG_20210519_092840878_HDR.jpg
IMG_20210519_092840878_HDR.jpg (2.56 MiB) Viewed 9076 times

Re: Jaguar VEE 12 XJS and Proteus

Posted: Thu May 20, 2021 6:41 pm
by bill
IMG_20210517_102402393.jpg
IMG_20210517_102402393.jpg (2.59 MiB) Viewed 9073 times
IMG_20210517_102806134.jpg
IMG_20210517_102806134.jpg (2.5 MiB) Viewed 9073 times
IMG_20210517_102810250.jpg
IMG_20210517_102810250.jpg (2.32 MiB) Viewed 9073 times

Re: Jaguar VEE 12 XJS and Proteus

Posted: Thu May 20, 2021 9:56 pm
by AndreyB
Is it appropriate to power wash British Engineering? :)

Re: Jaguar VEE 12 XJS and Proteus

Posted: Fri May 21, 2021 7:29 pm
by dexter_lab
cleaning is necessary unless you wan to measure in mouse power instead of horse power :)

Re: Jaguar VEE 12 XJS and Proteus

Posted: Sun Jun 06, 2021 10:28 am
by bill
okay so i gave it a blast of air ...
IMG_20210531_094128042.jpg
IMG_20210531_094128042.jpg (2.62 MiB) Viewed 8614 times

Re: Jaguar VEE 12 XJS and Proteus

Posted: Sun Jun 06, 2021 10:34 am
by bill
wiring diagrams

A is RH bank drivers side , B is LH bank as viewed from the front.
put ETB 1 on drivers side bank

ETB
Pin Wire Color Description
A BRN Throttle Actuator Motor Control
B YEL Throttle Actuator Motor Control
C TAN Ground
D DK GRN TPS 1 Signal
E GRY 5 Volts
F PPL TPS 2 Signal

COIL on plug MAZDA
right hand to left hand when staring at the connector on the coil
a-- 12V
b-- trigger
c-- ion sense
d-- ground

PROTEUS WIRING
analog volt 1 -->MAP
" " 2 --> ETB 1A
' ' 3 --> ETB 1B
" " 4 --> ETB 2A
" " 5--> ETB 2 B
" " 6--> pedal A
" " 7--> pedal B

gas pedal from Ford Fusion
second pic
mazda coil on plug wiring skyactiv.gif
mazda coil on plug wiring skyactiv.gif (21.9 KiB) Viewed 8614 times
ford fusion gas pedal wiring.jpg
ford fusion gas pedal wiring.jpg (116.15 KiB) Viewed 8614 times

Re: Jaguar VEE 12 XJS and Proteus

Posted: Mon Jun 07, 2021 7:37 pm
by bill
looks like that ETB was made to fit on this manifold ...

and perhaps a 6 speed swap?
{next year...}
IMG_20210606_090522520.jpg
IMG_20210606_090522520.jpg (2.11 MiB) Viewed 8543 times
IMG_20210604_162007079.jpg
IMG_20210604_162007079.jpg (1.78 MiB) Viewed 8543 times
IMG_20210531_101245610.jpg
IMG_20210531_101245610.jpg (2.39 MiB) Viewed 8543 times