work in progress Hotboi Drift Car Marketing Project

[BeerMoneyMotorsports]

I have wanted to do ITBs for a VERY long time. Recently i was looking into it again and found the E-ITB from 2017-19 CBR1000rr. As soon as i found it, i bought it. Its the perfect combo for a marketing project for Hellen Miata. Cool points of ITB and showing off that we are the only pnp that supports it. It will be receiving lots of polish in the engine bay. Part of the cleanup will be the change to Volvo Electronic Power Steering pump. There will be livery in the near future as well.

Here is the subject in question. 2001 with hotboi kit, wheels, BC coils and angle kit. Bone stock powertrain. I took it out to an event shortly after buying it.

IMG_9259.jpg (2.83 MiB) Viewed 5150 times

IMG_9178.jpg (2.15 MiB) Viewed 5150 times

The throttles and test fitting with a printed manifold.

IMG_9614.png (1.09 MiB) Viewed 5150 times

IMG_9736.jpg (1.43 MiB) Viewed 5150 times

Bench test rig and the Billet manifold

IMG_9390.jpg (1.57 MiB) Viewed 5150 times

IMG_9791.png (1.83 MiB) Viewed 5150 times

IMG_0177.jpg (185.69 KiB) Viewed 5150 times

IMG_0178.jpg (176.78 KiB) Viewed 5150 times

Trying out a Merc remote mount PPS in an attempt to maintain cruise.

IMG_0132.jpg (1.11 MiB) Viewed 5150 times

Using a Volvo electronic over hydraulic pump

IMG_0029.png (2.44 MiB) Viewed 5150 times

[BeerMoneyMotorsports]

Now anodized!

10DBDF63-DFEC-4BBD-8734-A2FC593096E4.jpeg (114.68 KiB) Viewed 5094 times

[duhafnusa4]

goooooooooooooooooooooooooooooooooold

[BeerMoneyMotorsports]

ITS ALIIIIVE