rusefi.com

Looking to set rusEFI on a 2022 Canam side-by-side vehicles.

I have the wiring diagram but I am failing to comprehend it

https://github.com/rusefi/rusefi_documentation/blob/master/OEM-Docs/CanAm/SSV%202022%20MAVERICK%20-%20Wiring%20Diagram.pdf (same file has two versions of the pinout just to make it more fun)

Seat belt switch how hard could that be right? With stock ECU Pin B OR/VI wire reads some sort of switched +12 volts. It goes to a JT (junction?) with VT/GY? Which goes where? Maybe same is mentioned as oxygen sensor heater+?

Well there is also this legend saying that green color code is ground. So the +12v I am seeing is some pull-up. Weird.

Hi dear, i' m Alessandor, i work on brp seadoo very similar to this, maybe somethink was wrong, i try to find new eletrical diagram but sure lambda heater going in this junction, see fuse name.

Have you develop more for this veicle? I need to build one ecu for this, new version, very similar to hellen 112 17 but different pinout

Ha, the black one has fuel system issues but stock ECU deals with it! We have a chance to play with closed loop range settings

Polaris is more or less the same thing, just totally different.

53 inches seems to be the perfect length if you need to do the same.