2022 Canam

[AndreyB]

Looking to set rusEFI on a 2022 Canam side-by-side vehicles.

WhatsApp Image 2023-11-15 at 19.23.07_d54be4fa.jpg (278.42 KiB) Viewed 19628 times

[AndreyB]

I have the wiring diagram but I am failing to comprehend it

https://github.com/rusefi/rusefi_documentation/blob/master/OEM-Docs/CanAm/SSV%202022%20MAVERICK%20-%20Wiring%20Diagram.pdf (same file has two versions of the pinout just to make it more fun)

Seat belt switch how hard could that be right? With stock ECU Pin B OR/VI wire reads some sort of switched +12 volts. It goes to a JT (junction?) with VT/GY? Which goes where? Maybe same is mentioned as oxygen sensor heater+?

image.png (62.18 KiB) Viewed 19627 times

image.png (79.15 KiB) Viewed 19627 times

[AndreyB]

Well there is also this legend saying that green color code is ground. So the +12v I am seeing is some pull-up. Weird.

image.png (54.13 KiB) Viewed 19622 times

[Alex90]

Screenshot_20240114_112030_Adobe Acrobat.jpg (293.62 KiB) Viewed 17139 times

Hi dear, i' m Alessandor, i work on brp seadoo very similar to this, maybe somethink was wrong, i try to find new eletrical diagram but sure lambda heater going in this junction, see fuse name.

Have you develop more for this veicle? I need to build one ecu for this, new version, very similar to hellen 112 17 but different pinout

[AndreyB]

Ha, the black one has fuel system issues but stock ECU deals with it! We have a chance to play with closed loop range settings

WhatsApp Image 2024-03-14 at 13.45.23_7eb0e610.jpg (327.86 KiB) Viewed 6938 times