hello everyone
i m interested diy ecus
i was used vems and ms
i have a e30 320i 1984 i want to conversation injection system bosch to rusefi
my brother is a micro programer and i m a car mechanic
i think we can do this job
hello friends
- AndreyB
- Site Admin
- Posts: 14333
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: hello friends
I am sure we can get this done.izmirliss wrote:my brother is a micro programer and i m a car mechanic
i think we can do this job
Check the Where to start & how to get involved? and poke your brother to start looking at the source code
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
- AndreyB
- Site Admin
- Posts: 14333
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: hello friends
What is your plan on the hardware? The discovery board is only the brain of the system, it would also need input and output circuits.
Some people here are soldering there own schematics and my own approach is ordering these 'module' boards we have designed here - more on this
Obviously the inputs come first, so you would need to either solder your position sensor input circuit or order one of the two 'adc amp' options (the smaller one has minor issues, the larger one is supposed to be better but this one has not yet been tested by anyone)
Some people here are soldering there own schematics and my own approach is ordering these 'module' boards we have designed here - more on this
Obviously the inputs come first, so you would need to either solder your position sensor input circuit or order one of the two 'adc amp' options (the smaller one has minor issues, the larger one is supposed to be better but this one has not yet been tested by anyone)
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Re: hello friends
a newbie question
how we know which pin which input or output on discovery
how we know which pin which input or output on discovery
- AndreyB
- Site Admin
- Posts: 14333
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: hello friends
In general we look at discovery reference. For rusEfi purposes we look at https://svn.code.sf.net/p/rusefi/code/trunk/firmware/config/boards/arro_board.hizmirliss wrote:a newbie question
how we know which pin which input or output on discovery
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute