Hi all.
I currently run a '95 mx5 turbo with a 2003vvt engine.
it's on Speeduino at the mo and runs well...but I wanted to try rusefi so I'm starting off planning to use it as a VVT controller.
here is my bench test.
- cheap "DIY more" stm 32f407
- Arduino mega running Ardustim (pattern generator for various decoders)
- an opto board for level shifting.
I added a pattern in ardustim 5degress advanced and tested switching between the 2. looks good
1995 MX5 (Miata) VVT. turbo. rusefi VVT controller...
Re: 1995 MX5 (Miata) VVT. turbo. rusefi VVT controller...
Sweeping RPM test. offset fixed for 0 degrees
triggers look good
next is to connect some real sensors to the car and see what comes out
triggers look good
next is to connect some real sensors to the car and see what comes out
Re: 1995 MX5 (Miata) VVT. turbo. rusefi VVT controller...
Today, I am trying to sort an exhaust leak and fitting some mk2.5 vvt crank/ cam sensors ready to connect to rusEFI (i currently use a mk1 cas )
I am running a mk1 cas with 24/1 yoshifab wheel, toyota yaris cops, a turbo off a volvo S60, and a mk2.5 vvt engine.
this is engine #3 . i have snapped rods in the 1st and bent rods in the 2nd. oops
I am running a mk1 cas with 24/1 yoshifab wheel, toyota yaris cops, a turbo off a volvo S60, and a mk2.5 vvt engine.
this is engine #3 . i have snapped rods in the 1st and bent rods in the 2nd. oops
- AndreyB
- Site Admin
- Posts: 14325
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: 1995 MX5 (Miata) VVT. turbo. rusefi VVT controller...
What could possibly go wrong
We are here to help once you need help. 24/1 and NB2 VVT should be possible to configure with current flexibiliy.
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Re: 1995 MX5 (Miata) VVT. turbo. rusefi VVT controller...
Brilliant thanks Russian!
tried LCD today. need to sort a joystick.( rotary encoder would be cool . only because I have loads in the parts bin)
tried LCD today. need to sort a joystick.( rotary encoder would be cool . only because I have loads in the parts bin)
Re: 1995 MX5 (Miata) VVT. turbo. rusefi VVT controller...
[youtube][/youtube]
tested vvt triggers today.
is it normal for the VVT angle to be unsettled slightly when blipping the throttle?
tested vvt triggers today.
is it normal for the VVT angle to be unsettled slightly when blipping the throttle?
Re: 1995 MX5 (Miata) VVT. turbo. rusefi VVT controller...
Hi ...mazdee wrote:[youtube][/youtube]
tested vvt triggers today.
is it normal for the VVT angle to be unsettled slightly when blipping the throttle?
I'm a little confused ...
you use RusEFI software ... on speeduino electronics (hardware electronics) ...
why and why !!!!
Sent from my HTC One M9 using Tapatalk
Re: 1995 MX5 (Miata) VVT. turbo. rusefi VVT controller...
I already have a working setup and it's my daily. using rusefi to do VVT, maybe boost and knock too
Re: 1995 MX5 (Miata) VVT. turbo. rusefi VVT controller...
Speedy doesn't do closed loop VVT yet and something like Vvtuner from diyautotune is £200 ...
- AndreyB
- Site Admin
- Posts: 14325
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: 1995 MX5 (Miata) VVT. turbo. rusefi VVT controller...
Few degrees here and there on throttle is what I have, I assume does not matter.
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute