Toyota 2GR-FSE engine

What engine are you torturing? Is it inside some car?
Post Reply
mpro
contributor
contributor
Posts: 64
Joined: Sun Nov 10, 2013 8:31 pm
Location: Moscow

Toyota 2GR-FSE engine

Post by mpro » Wed Dec 04, 2013 8:07 pm

My engine is Toyota 2gr-fse.
It is 3.5L V6. It has D4-S twin injection fuel system. This system combines direct injection with traditional port injection.
Also it has 4 VVTi-s.
It's output is 305 @ 6,400 RPM.

User avatar
russian
Site Admin
Posts: 9741
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Soldering skill: yes
Coding skill?: yes
Contact:

Re: Toyota 2GR-FSE engine

Post by russian » Wed Dec 04, 2013 8:15 pm

Lovely! From http://en.wikipedia.org/wiki/Gasoline_direct_injection:
Adding this function to the EMS requires considerable enhancement of its processing and memory, as direct injection plus the engine speed management must have very precise algorithms for good performance and drivability.
Can anyone please elaborate on what is the complexity with GDI exactly? Does it make a number of injections within one cycle? How the heck are we going to figure out the algorithms? :)

At least in this engine GDI is only for the environmental efficiency
Using direct injection and port injection simultaneously facilitates maximum power under high load conditions, while low and medium load conditions more precise mixing of air and fuel for greater efficiency dictate the use of direct injection alone.
This might sound depressing, but I suggest we start by using only the port injection and add the direct injection later, when we get this at running at least on the port injection.
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

User avatar
kb1gtt
contributor
contributor
Posts: 3478
Joined: Tue Sep 10, 2013 1:42 am
Location: ME of USA
Contact:

Re: Toyota 2GR-FSE engine

Post by kb1gtt » Thu Dec 05, 2013 1:49 am

Nice, is this the high pressure stuff with the high voltage injectors? Also are you interested in trying to drive that kind of injector? I once drafted a PCB circuit to drive this kind of higher voltage injector. However I never built it as I don't have direct injection to play with.
Welcome to the friendlier side of internet crazy :)

mpro
contributor
contributor
Posts: 64
Joined: Sun Nov 10, 2013 8:31 pm
Location: Moscow

Re: Toyota 2GR-FSE engine

Post by mpro » Fri Dec 06, 2013 5:21 pm

kb1gtt wrote:Nice, is this the high pressure stuff with the high voltage injectors? Also are you interested in trying to drive that kind of injector? I once drafted a PCB circuit to drive this kind of higher voltage injector. However I never built it as I don't have direct injection to play with.
Yes. Yes I want to use this kind of injector.

Post Reply