VOLVO B20

Your chance to introduce yourself and your vehicle
User avatar
hasse.69
donator
donator
Posts: 77
Joined: Wed Dec 04, 2013 3:34 pm
Location: Sweden Linkoping/Vadstena

Re: VOLVO B20

Post by hasse.69 »

When i reset the board after firmware update.
I get a all four led blink then the blue and red flashes and the green is lit all the time.
I havea little red led by the micro usb thats lit.
The big red led by the mini usb is also lit.
PD1-PC6 is my connection , will try without.
:?
"Electronically challenged of the world, unite!"
User avatar
hasse.69
donator
donator
Posts: 77
Joined: Wed Dec 04, 2013 3:34 pm
Location: Sweden Linkoping/Vadstena

Re: VOLVO B20

Post by hasse.69 »

Now only the blue of the four is blinking.
"Electronically challenged of the world, unite!"
User avatar
hasse.69
donator
donator
Posts: 77
Joined: Wed Dec 04, 2013 3:34 pm
Location: Sweden Linkoping/Vadstena

Re: VOLVO B20

Post by hasse.69 »

Still nothing in Putty , i´ve switched tx and rx too. :(
"Electronically challenged of the world, unite!"
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: VOLVO B20

Post by AndreyB »

Please take a picture with the USB TTL device and without the simulation wire, maybe this would do the trick.

I am out of ideas for now, I will go fix the bug and update you once I've done that.
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
puff
contributor
contributor
Posts: 2961
Joined: Mon Nov 11, 2013 11:28 am
Location: Moskau

Re: VOLVO B20

Post by puff »

i guess you're having issues with your usb-to-serial converter - probably lack of drivers?
the easiest way to check if it works is connecting its Tx pin to its Rx pin (without any other boards) and typing stuff in your hyper terminal.
here's what I've found for XP:
http://www.compsys1.com/support/docs/usb_rs232_test.pdf
User avatar
hasse.69
donator
donator
Posts: 77
Joined: Wed Dec 04, 2013 3:34 pm
Location: Sweden Linkoping/Vadstena

Re: VOLVO B20

Post by hasse.69 »

Thats what i think to.
But i have this:
COMPORT15.JPG
COMPORT15.JPG (45.2 KiB) Viewed 16811 times
"Electronically challenged of the world, unite!"
puff
contributor
contributor
Posts: 2961
Joined: Mon Nov 11, 2013 11:28 am
Location: Moskau

Re: VOLVO B20

Post by puff »

so probably you should be able to connect to com15 with you hyper terminal, and, provided that everything works fine and you have connected your tx pin to your rx pin on the usb-to-serial converter, you should see what you type in your terminal. when you disconnect these two pins from each other, you shouldn't see anything on the screen when you type.
User avatar
hasse.69
donator
donator
Posts: 77
Joined: Wed Dec 04, 2013 3:34 pm
Location: Sweden Linkoping/Vadstena

Re: VOLVO B20

Post by hasse.69 »

Aha , thank you Puff!
Now i have the right settings in my usb-ttl device.
My mistake its working.
When i type with rx and tx together i get what i write in PUTTy.
If i disconnect rx and tx nothing appears in PUTTy.
Last edited by hasse.69 on Sun Mar 09, 2014 9:17 pm, edited 1 time in total.
"Electronically challenged of the world, unite!"
puff
contributor
contributor
Posts: 2961
Joined: Mon Nov 11, 2013 11:28 am
Location: Moskau

Re: VOLVO B20

Post by puff »

imho without having echo (with RX and TX pins connected to each other) there's no sense to continue with discovery :?
do you have the prolific driver installed? (http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=225&pcid=41)
what's the OS you are using? XP? 7?
could it be that your converter is broken?
User avatar
hasse.69
donator
donator
Posts: 77
Joined: Wed Dec 04, 2013 3:34 pm
Location: Sweden Linkoping/Vadstena

Re: VOLVO B20

Post by hasse.69 »

Sorry see my edited reply
"Electronically challenged of the world, unite!"
puff
contributor
contributor
Posts: 2961
Joined: Mon Nov 11, 2013 11:28 am
Location: Moskau

Re: VOLVO B20

Post by puff »

nice!
well, next, when you right-click that com15 thing, you'd probably see the window where you can change the baud rate. change it to 115200. try connecting all four wires to the discovery board (not sure if the red one should go to 5V or to 3.3V). open the same hyper term, com15, and hit 't' in the english layout.
hope this works…
User avatar
hasse.69
donator
donator
Posts: 77
Joined: Wed Dec 04, 2013 3:34 pm
Location: Sweden Linkoping/Vadstena

Re: VOLVO B20

Post by hasse.69 »

This is the last for today.
TUNERSTUDIO.JPG
TUNERSTUDIO.JPG (160.85 KiB) Viewed 16643 times
This is with micro USB and USB-TTL connected all wires TX , RX , 5V and GND.
No mini USB connected.
"Electronically challenged of the world, unite!"
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: VOLVO B20

Post by AndreyB »

Here you have connected TS to the wrong COM port - it does not like the microUSB feed, it wants the TTL feed.
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
User avatar
hasse.69
donator
donator
Posts: 77
Joined: Wed Dec 04, 2013 3:34 pm
Location: Sweden Linkoping/Vadstena

Re: VOLVO B20

Post by hasse.69 »

This is what i get when trying to connect.
UNKNOWN DEVICE.JPG
UNKNOWN DEVICE.JPG (163.39 KiB) Viewed 16643 times
"Electronically challenged of the world, unite!"
User avatar
kb1gtt
contributor
contributor
Posts: 3758
Joined: Tue Sep 10, 2013 1:42 am
Location: ME of USA

Re: VOLVO B20

Post by kb1gtt »

russian, what version of TS are known to work? I've seen TS make updates that break older versions. Can you verify he's using a compatible version of TS.
Welcome to the friendlier side of internet crazy :)
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: VOLVO B20

Post by AndreyB »

That's a compatible version and the issue is before TS for sure, we have not confirmed connectivity yet and there is a real chance there is a bug in rusEfi. Tomorrow it be better :)
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
User avatar
hasse.69
donator
donator
Posts: 77
Joined: Wed Dec 04, 2013 3:34 pm
Location: Sweden Linkoping/Vadstena

Re: VOLVO B20

Post by hasse.69 »

So close. :lol:
"Electronically challenged of the world, unite!"
Post Reply