[rusEfi] Mitsubishi 4G63 and 4G92 (#6)

Your chance to introduce yourself and your vehicle
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Mitsubishi 4G63 and 4G92 (#6)

Post by AndreyB »

Tambralinga wrote:If my hall sensor input primary input channel PC6 and secondary input channel PA5.
I can setting speed sensor PC6 or PA5?
No.

If you are using PC6 and PA5 for shaft position sensors, you need to use something else for VSS. PA8 for example is one of the options, but you would need to wire the signal through op-amp, same way as shaft sensors are wired.
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
User avatar
Tambralinga
donator
donator
Posts: 174
Joined: Wed Jun 18, 2014 8:36 am
Location: Bangkok, Thailand

Re: Mitsubishi 4G63 and 4G92 (#6)

Post by Tambralinga »

Code: Select all

CLT GPIO PC3
 Low temp 20
 Resistor 2500
 middel Temp 23.9
 resistor 2080
 Hi temp 80
 resistor 300

IAT GPIO PA1
 Low temp 8.9
 Resistor 7000
 middel Temp 30.6
 resistor 1930
 Hi temp 63
 resistor 560

Crank coolant temp
          Coolant           Correction
             -18	             160
              -7	             150
               4	             135
              16	             125
              27	             116
              38	             108
              54	             102
              71	             100

TPS	PC1
CLT	PC3
IAT	PA1
MAP	PA4
ARF	PC4
Fan	PE0
Pump	PC13
FSIO	PE1

Injection Pin1	PB9
Injection Pin2	PB8
Injection Pin3	PE3
Injection Pin4	PE5
	
Ignition Pin1	PE14
Ignition Pin2	NONE
Ignition Pin3	PE12
Ignition Pin4	NONE
	


Pls change new config for mitsubishi and Trigger type Miata NA
Skype : shiva-p
+66 8 5357 5159
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Mitsubishi 4G63 and 4G92 (#6)

Post by AndreyB »

Tambralinga wrote:Pls change new config
"change" or "new"?
Are we changing existing config or creating a new config so that there are two different Mitsubishi configs?
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
User avatar
Tambralinga
donator
donator
Posts: 174
Joined: Wed Jun 18, 2014 8:36 am
Location: Bangkok, Thailand

Re: Mitsubishi 4G63 and 4G92 (#6)

Post by Tambralinga »

russian wrote:
Tambralinga wrote:Pls change new config
"change" or "new"?
Are we changing existing config or creating a new config so that there are two different Mitsubishi configs?
Edited from the original.
Skype : shiva-p
+66 8 5357 5159
User avatar
Tambralinga
donator
donator
Posts: 174
Joined: Wed Jun 18, 2014 8:36 am
Location: Bangkok, Thailand

Re: Mitsubishi 4G63 and 4G92 (#6)

Post by Tambralinga »

I want to know if the protocal between TS with STM 32 to find out from where?
Skype : shiva-p
+66 8 5357 5159
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Mitsubishi 4G63 and 4G92 (#6)

Post by AndreyB »

Sorry I have not hard-coded your config yet :(

There are some comments on top of the source code files,
Most comments are in https://svn.code.sf.net/p/rusefi/code/trunk/firmware/console/binary/tunerstudio_io.cpp
also something in https://svn.code.sf.net/p/rusefi/code/trunk/firmware/console/binary/tunerstudio.cpp
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
User avatar
Tambralinga
donator
donator
Posts: 174
Joined: Wed Jun 18, 2014 8:36 am
Location: Bangkok, Thailand

Re: Mitsubishi 4G63 and 4G92 (#6)

Post by Tambralinga »

russian wrote:Sorry I have not hard-coded your config yet :(

There are some comments on top of the source code files,
Most comments are in https://svn.code.sf.net/p/rusefi/code/trunk/firmware/console/binary/tunerstudio_io.cpp
also something in https://svn.code.sf.net/p/rusefi/code/trunk/firmware/console/binary/tunerstudio.cpp
You have protocol for dev console?
Skype : shiva-p
+66 8 5357 5159
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Mitsubishi 4G63 and 4G92 (#6)

Post by AndreyB »

Tambralinga wrote:You have protocol for dev console?
dev console is now using the same protocol
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
User avatar
Tambralinga
donator
donator
Posts: 174
Joined: Wed Jun 18, 2014 8:36 am
Location: Bangkok, Thailand

Re: Mitsubishi 4G63 and 4G92 (#6)

Post by Tambralinga »

Hello.

I came back after long gone.
How far is the development?
can use old config?
Skype : shiva-p
+66 8 5357 5159
User avatar
Tambralinga
donator
donator
Posts: 174
Joined: Wed Jun 18, 2014 8:36 am
Location: Bangkok, Thailand

Re: Mitsubishi 4G63 and 4G92 (#6)

Post by Tambralinga »

I don't know knock sensor freq override for mitsubish 4g93

firmware 20180401
set_engine_16 fatail error HW timer
Skype : shiva-p
+66 8 5357 5159
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Mitsubishi 4G63 and 4G92 (#6)

Post by AndreyB »

Not many changes, old engine types should work. CJ125 by @ is the most important progress recently.

Just added missing parameter to make knock band configurable - https://github.com/rusefi/rusefi/commit/c757009065f35c2eb3b8047cc31ee160201b21a2

fatail error HW timer can you reproduce this or is this a one time thing? Can you get me steps to reproduce reliably?
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
User avatar
Tambralinga
donator
donator
Posts: 174
Joined: Wed Jun 18, 2014 8:36 am
Location: Bangkok, Thailand

Re: Mitsubishi 4G63 and 4G92 (#6)

Post by Tambralinga »

error after set_engine_type 16

Code: Select all

2018-05-21 19_00: EngineState: confirmation_set_engine_type 16:18
2018-05-21 19_00: EngineState: unknown [set_engine_type 16]
2018-05-21 19_00: EngineState: 140 actions available
2018-05-21 19_00: EngineState:   pins: 0 parameters
2018-05-21 19_00: EngineState:   help: 0 parameters
2018-05-21 19_00: EngineState:   echo: 1 parameters
2018-05-21 19_00: EngineState:   ~: 0 parameters
2018-05-21 19_00: EngineState:   test: 0 parameters
2018-05-21 19_00: EngineState:   hello: 0 parameters
2018-05-21 19_00: EngineState:   fatal: 0 parameters
2018-05-21 19_00: EngineState:   error: 0 parameters
2018-05-21 19_00: EngineState:   threadsinfo: 0 parameters
2018-05-21 19_00: EngineState:   reboot: 0 parameters
2018-05-21 19_00: EngineState:   readconfig: 0 parameters
2018-05-21 19_00: EngineState:   writeconfig: 0 parameters
2018-05-21 19_00: EngineState:   burnconfig: 0 parameters
2018-05-21 19_00: EngineState:   resetconfig: 0 parameters
2018-05-21 19_00: EngineState:   rewriteconfig: 0 parameters
2018-05-21 19_00: EngineState:   lcdinfo: 0 parameters
2018-05-21 19_00: EngineState:   adcdebug: 1 parameters
2018-05-21 19_00: EngineState:   adc: 1 parameters
2018-05-21 19_00: EngineState:   egtinfo: 0 parameters
2018-05-21 19_00: EngineState:   egtread: 0 parameters
2018-05-21 19_00: EngineState:   caninfo: 0 parameters
2018-05-21 19_00: EngineState:   chartsize: 1 parameters
2018-05-21 19_00: EngineState:   chart: 1 parameters
2018-05-21 19_00: EngineState:   reset_engine_chart: 0 parameters
2018-05-21 19_00: EngineState:   triggerinfo: 0 parameters
2018-05-21 19_00: EngineState:   trigger_shape_info: 0 parameters
2018-05-21 19_00: EngineState:   reset_trigger: 0 parameters
2018-05-21 19_00: EngineState:   hipinfo: 0 parameters
2018-05-21 19_00: EngineState:   set_gain: 1 parameters
2018-05-21 19_00: EngineState:   set_band: 1 parameters
2018-05-21 19_00: EngineState:   set_hip_prescalerandsdo: 1 parameters
2018-05-21 19_00: EngineState:   set_knock_threshold: 1 parameters
2018-05-21 19_00: EngineState:   set_max_knock_sub_deg: 1 parameters
2018-05-21 19_00: EngineState:   sdinfo: 0 parameters
2018-05-21 19_00: EngineState:   mountsd: 0 parameters
2018-05-21 19_00: EngineState:   appendtolog: 1 parameters
2018-05-21 19_00: EngineState:   umountsd: 0 parameters
2018-05-21 19_00: EngineState:   ls: 1 parameters
2018-05-21 19_00: EngineState:   del: 1 parameters
2018-05-21 19_00: EngineState:   incfilename: 0 parameters
2018-05-21 19_00: EngineState:   i2c: 2 parameters
2018-05-21 19_00: EngineState:   speedinfo: 0 parameters
2018-05-21 19_00: EngineState:   joystickinfo: 0 parameters
2018-05-21 19_00: EngineState:   fl: 1 parameters
2018-05-21 19_00: EngineState:   warn: 1 parameters
2018-05-21 19_00: EngineState:   fuelinfo2: 2 parameters
2018-05-21 19_00: EngineState:   fuelinfo: 0 parameters
2018-05-21 19_00: EngineState:   set_led_blinking_period: 1 parameters
2018-05-21 19_00: EngineState:   status: 0 parameters
2018-05-21 19_00: EngineState:   analoginfo: 0 parameters
2018-05-21 19_00: EngineState:   set_float: 2 parameters
2018-05-21 19_00: EngineState:   set_int: 2 parameters
2018-05-21 19_00: EngineState:   set_short: 2 parameters
2018-05-21 19_00: EngineState:   set_bit: 3 parameters
2018-05-21 19_00: EngineState:   get_float: 1 parameters
2018-05-21 19_00: EngineState:   get_int: 1 parameters
2018-05-21 19_00: EngineState:   get_short: 1 parameters
2018-05-21 19_00: EngineState:   get_bit: 2 parameters
2018-05-21 19_00: EngineState:   set_sensor_chart_freq: 1 parameters
2018-05-21 19_00: EngineState:   showconfig: 0 parameters
2018-05-21 19_00: EngineState:   tempinfo: 0 parameters
2018-05-21 19_00: EngineState:   tpsinfo: 0 parameters
2018-05-21 19_00: EngineState:   info: 0 parameters
2018-05-21 19_00: EngineState:   set_one_coil_ignition: 0 parameters
2018-05-21 19_00: EngineState:   set_wasted_spark_ignition: 0 parameters
2018-05-21 19_00: EngineState:   set_individual_coils_ignition: 0 parameters
2018-05-21 19_00: EngineState:   set_whole_phase_map: 1 parameters
2018-05-21 19_00: EngineState:   set_whole_timing_map: 1 parameters
2018-05-21 19_00: EngineState:   set_whole_fuel_map: 1 parameters
2018-05-21 19_00: EngineState:   set_whole_ve_map: 1 parameters
2018-05-21 19_00: EngineState:   set_whole_ign_corr_map: 1 parameters
2018-05-21 19_00: EngineState:   set_fuel_map: 3 parameters
2018-05-21 19_00: EngineState:   set_timing_map: 3 parameters
2018-05-21 19_00: EngineState:   stopengine: 0 parameters
2018-05-21 19_00: EngineState:   enable_spi: 1 parameters
2018-05-21 19_00: EngineState:   disable_spi: 1 parameters
2018-05-21 19_00: EngineState:   enable: 1 parameters
2018-05-21 19_00: EngineState:   disable: 1 parameters
2018-05-21 19_00: EngineState:   set_toothed_wheel: 2 parameters
2018-05-21 19_00: EngineState:   set_flat_injector_lag: 1 parameters
2018-05-21 19_00: EngineState:   set_injector_lag: 2 parameters
2018-05-21 19_00: EngineState:   set_fan: 2 parameters
2018-05-21 19_00: EngineState:   set: 2 parameters
2018-05-21 19_00: EngineState:   get: 1 parameters
2018-05-21 19_00: EngineState:   showpin: 1 parameters
2018-05-21 19_00: EngineState:   set_injection_pin: 2 parameters
2018-05-21 19_00: EngineState:   set_ignition_pin: 2 parameters
2018-05-21 19_00: EngineState:   set_trigger_input_pin: 2 parameters
2018-05-21 19_00: EngineState:   set_trigger_simulator_pin: 2 parameters
2018-05-21 19_00: EngineState:   set_egt_cs_pin: 2 parameters
2018-05-21 19_00: EngineState:   set_egt_spi: 1 parameters
2018-05-21 19_00: EngineState:   set_trigger_simulator_mode: 2 parameters
2018-05-21 19_00: EngineState:   set_fuel_pump_pin: 1 parameters
2018-05-21 19_00: EngineState:   set_ac_pin: 1 parameters
2018-05-21 19_00: EngineState:   set_alternator_pin: 1 parameters
2018-05-21 19_00: EngineState:   set_idle_pin: 1 parameters
2018-05-21 19_00: EngineState:   set_main_relay_pin: 1 parameters
2018-05-21 19_00: EngineState:   set_analog_input_pin: 2 parameters
2018-05-21 19_00: EngineState:   set_logic_input_pin: 2 parameters
2018-05-21 19_00: EngineState:   set_pot_spi: 1 parameters
2018-05-21 19_00: EngineState:   tsinfo: 0 parameters
2018-05-21 19_00: EngineState:   reset_ts: 0 parameters
2018-05-21 19_00: EngineState:   set_ts_speed: 1 parameters
2018-05-21 19_00: EngineState:   test_clt_by_r: 1 parameters
2018-05-21 19_00: EngineState:   mapinfo: 0 parameters
2018-05-21 19_00: EngineState:   set_fsio_pid_output_pin: 2 parameters
2018-05-21 19_00: EngineState:   set_fsio_output_pin: 2 parameters
2018-05-21 19_00: EngineState:   set_fsio_output_frequency: 2 parameters
2018-05-21 19_00: EngineState:   set_fsio_input_pin: 2 parameters
2018-05-21 19_00: EngineState:   set_rpn_expression: 2 parameters
2018-05-21 19_00: EngineState:   set_fsio_setting: 2 parameters
2018-05-21 19_00: EngineState:   fsioinfo: 0 parameters
2018-05-21 19_00: EngineState:   rpn_eval: 1 parameters
2018-05-21 19_00: EngineState:   accelinfo: 0 parameters
2018-05-21 19_00: EngineState:   binarytest: 0 parameters
2018-05-21 19_00: EngineState:   waveinfo: 0 parameters
2018-05-21 19_00: EngineState:   set_logic_input_mode: 2 parameters
2018-05-21 19_00: EngineState:   injector: 2 parameters
2018-05-21 19_00: EngineState:   fuelpumpbench: 0 parameters
2018-05-21 19_00: EngineState:   fuelpumpbench2: 1 parameters
2018-05-21 19_00: EngineState:   fanbench: 0 parameters
2018-05-21 19_00: EngineState:   fanbench2: 1 parameters
2018-05-21 19_00: EngineState:   dizzybench: 0 parameters
2018-05-21 19_00: EngineState:   milbench: 0 parameters
2018-05-21 19_00: EngineState:   fuelbench: 3 parameters
2018-05-21 19_00: EngineState:   sparkbench: 3 parameters
2018-05-21 19_00: EngineState:   fuelbench2: 5 parameters
2018-05-21 19_00: EngineState:   sparkbench2: 5 parameters
2018-05-21 19_00: EngineState:   altinfo: 0 parameters
2018-05-21 19_00: EngineState:   ethinfo: 0 parameters
2018-05-21 19_00: EngineState:   faststat: 0 parameters
2018-05-21 19_00: EngineState:   performanceinfo: 0 parameters
2018-05-21 19_00: EngineState:   maininfo: 0 parameters
2018-05-21 19_00: EngineState:   idleinfo: 0 parameters
2018-05-21 19_00: EngineState:   blipidle: 2 parameters
2018-05-21 19_00: EngineState:   idlebench: 0 parameters
2018-05-21 19_00: EngineState:   reset_accel: 0 parameters
2018-05-21 19_00: EngineState:   rpm: 1 parameters
2018-05-21 19_00: EngineState:   stop_stimulator_at_index: 1 parameters
2018-05-21 19_00: EngineState:   resume_stimulator: 0 parameters
2018-05-21 19_00: EngineState: For more visit http://rusefi.com/wiki/index.php?title=Manual:Software:dev_console_commands
2018-05-21 19_00: EngineState: error: synchronizationPoint @ index 3 expected 2/2/0 got 4/0/0
2018-05-21 19_00: EngineState: error: synchronizationPoint @ index 3 expected 2/2/0 got 4/0/0
2018-05-21 19_00: EngineState: error: synchronizationPoint @ index 3 expected 2/2/0 got 4/0/0
2018-05-21 19_00: EngineState: error: synchronizationPoint @ index 3 expected 2/2/0 got 4/0/0

Code: Select all

2018-05-21 19_00: EngineState: error: synchronizationPoint @ index 3 expected 2/2/0 got 4/0/0
2018-05-21 19_00: EngineState: error: synchronizationPoint @ index 3 expected 2/2/0 got 4/0/0
2018-05-21 19_00: EngineState: error: synchronizationPoint @ index 3 expected 2/2/0 got 4/0/0
2018-05-21 19_00: EngineState: error: synchronizationPoint @ index 3 expected 2/2/0 got 4/0/0
Skype : shiva-p
+66 8 5357 5159
User avatar
Tambralinga
donator
donator
Posts: 174
Joined: Wed Jun 18, 2014 8:36 am
Location: Bangkok, Thailand

Re: Mitsubishi 4G63 and 4G92 (#6)

Post by Tambralinga »

step 1 erase chip
step 2 program new firmware
error ERROR: CRC header size



EngineState: FATAL error: HW timer state 1

Code: Select all

2018-05-23 13_15: CommandQueue: SerialIO started
2018-05-23 13_15: SerialManager: Opening port: COM5
2018-05-23 13_15: EngineState: WARNING: flash CRC failed
2018-05-23 13_15: EngineState: applyNonPersistentConfiguration()
2018-05-23 13_15: EngineState: initializeTriggerShape(TT_ONE_PLUS_ONE/16)
2018-05-23 13_15: EngineState: *** rusEFI (c) Andrey Belomutskiy 2012-2017. All rights reserved.
2018-05-23 13_15: EngineState: rusEFI v20180401@15715
2018-05-23 13_15: EngineState: *** Chibios Kernel:       4.0.3
2018-05-23 13_15: EngineState: *** Compiled:     May 20 2018 - 15:55:54
2018-05-23 13_15: EngineState: COMPILER=6.3.1 20170215 (release) [ARM/embedded-6-branch revision 245512]
2018-05-23 13_15: EngineState: CORTEX_MAX_KERNEL_PRIORITY=2
2018-05-23 13_15: EngineState: STM32_ADCCLK=21000000
2018-05-23 13_15: EngineState: STM32_TIMCLK1=84000000
2018-05-23 13_15: EngineState: STM32_TIMCLK2=168000000
2018-05-23 13_15: EngineState: STM32_PCLK1=42000000
2018-05-23 13_15: EngineState: STM32_PCLK2=84000000
2018-05-23 13_15: EngineState: PORT_IDLE_THREAD_STACK_SIZE=1024
2018-05-23 13_15: EngineState: CH_DBG_ENABLE_ASSERTS=1
2018-05-23 13_15: EngineState: CH_DBG_SYSTEM_STATE_CHECK=1
2018-05-23 13_15: EngineState: CH_DBG_ENABLE_STACK_CHECK=1
2018-05-23 13_15: EngineState: EFI_WAVE_ANALYZER=1
2018-05-23 13_15: EngineState: EFI_TUNER_STUDIO=1
2018-05-23 13_15: EngineState: EFI_SIGNAL_EXECUTOR_SLEEP=0
2018-05-23 13_15: EngineState: EFI_SIGNAL_EXECUTOR_HW_TIMER=0
2018-05-23 13_15: EngineState: EFI_SHAFT_POSITION_INPUT=1
2018-05-23 13_15: EngineState: EFI_INTERNAL_ADC=1
2018-05-23 13_15: EngineState: led: ERROR status on PD14
2018-05-23 13_15: EngineState: WARNING: flash CRC failed
2018-05-23 13_15: EngineState: applyNonPersistentConfiguration()
2018-05-23 13_15: EngineState: initializeTriggerShape(TT_ONE_PLUS_ONE/16)
2018-05-23 13_15: EngineState: lcd RS on PE7
2018-05-23 13_15: EngineState: lcd E on PE9
2018-05-23 13_15: EngineState: lcd DB4 on PE11
2018-05-23 13_15: EngineState: lcd DB5 on PE13
2018-05-23 13_15: EngineState: lcd DB6 on PE15
2018-05-23 13_15: EngineState: lcd DB7 on PB10
2018-05-23 13_15: EngineState: board test on PB0
2018-05-23 13_15: EngineState: adc input on PA0
2018-05-23 13_15: EngineState: adc input on PA2
2018-05-23 13_15: EngineState: adc input on PC0
2018-05-23 13_15: EngineState: adc input on PC1
2018-05-23 13_15: EngineState: adc input on PC2
2018-05-23 13_15: EngineState: adc input on PC3
2018-05-23 13_15: EngineState: adc input on PC4
2018-05-23 13_15: EngineState: spi CS5 on PD4
2018-05-23 13_15: EngineState: fuel pump relay on PE4
2018-05-23 13_15: EngineState: main relay on PD7
2018-05-23 13_15: EngineState: fan relay on PE5
2018-05-23 13_15: EngineState: CAN TX on PB6
2018-05-23 13_15: EngineState: CAN RX on PB12
2018-05-23 13_15: EngineState: engine chart: Yes
2018-05-23 13_15: EngineState: engine chart size=300
2018-05-23 13_15: EngineState: trigger#1 on PC6
2018-05-23 13_15: EngineState: turnOnTriggerInputPin PC6
2018-05-23 13_15: EngineState: trigger#2 on PA5
2018-05-23 13_15: EngineState: turnOnTriggerInputPin PA5
2018-05-23 13_15: EngineState: SPI clock on PB13
2018-05-23 13_15: EngineState: SPI master out on PB15
2018-05-23 13_15: EngineState: SPI master in  on PB14
2018-05-23 13_15: EngineState: SPI clock on PB3
2018-05-23 13_15: EngineState: SPI master out on PB5
2018-05-23 13_15: EngineState: SPI master in  on PB4
2018-05-23 13_15: EngineState: hip int/hold on PB11
2018-05-23 13_15: EngineState: hip CS on PB0
2018-05-23 13_15: EngineState: Starting HIP9011/TPIC8101 driver
2018-05-23 13_15: EngineState: joy center on PC8
2018-05-23 13_15: EngineState: joy A on PD10
2018-05-23 13_15: EngineState: joy D on PD11
2018-05-23 13_15: EngineState: i1 on PB9
2018-05-23 13_15: EngineState: i2 on PE2
2018-05-23 13_15: EngineState: i3 on PB8
2018-05-23 13_15: EngineState: i4 on PB7
2018-05-23 13_15: EngineState: c1 on PE14
2018-05-23 13_15: EngineState: c2 on PC7
2018-05-23 13_15: EngineState: c3 on PC9
2018-05-23 13_15: EngineState: c4 on PE10
2018-05-23 13_15: EngineState: injector_1: 1
2018-05-23 13_15: EngineState: injector_2: 1
2018-05-23 13_15: EngineState: injector_3: 1
2018-05-23 13_15: EngineState: injector_4: 1
2018-05-23 13_15: EngineState: led: comm status on PD15
2018-05-23 13_15: EngineState: led: warning status on PD13
2018-05-23 13_15: EngineState: led: running status on PD12
2018-05-23 13_15: EngineState: FATAL error: HW timer state 1
2018-05-23 13_15: EngineState: FATAL error: HW timer state 1
2018-05-23 13_15: EngineState: FATAL error: HW timer state 1
2018-05-23 13_15: EngineState: FATAL error: HW timer state 1
2018-05-23 13_15: EngineState: FATAL error: HW timer state 1
2018-05-23 13_15: EngineState: TS: ERROR: no second byte
2018-05-23 13_15: EngineState: TunerStudio size=356 / total=0 / errors=0 / H=0 / O=0 / P=0 / B=0
2018-05-23 13_15: EngineState: TunerStudio W=0 / C=0 / P=0 / page=0
2018-05-23 13_15: EngineState: FATAL error: HW timer state 1
2018-05-23 13_15: EngineState: FATAL error: HW timer state 1
after set set_engine_type 16

Code: Select all

2018-05-23 13_40: EngineState: confirmation_set_engine_type 16:18
2018-05-23 13_40: EngineState: unknown [set_engine_type 16]
2018-05-23 13_40: EngineState: 115 actions available
2018-05-23 13_40: EngineState:   pins: 0 parameters
2018-05-23 13_40: EngineState:   help: 0 parameters
2018-05-23 13_40: EngineState:   echo: 1 parameters
2018-05-23 13_40: EngineState:   ~: 0 parameters
2018-05-23 13_40: EngineState:   test: 0 parameters
2018-05-23 13_40: EngineState:   hello: 0 parameters
2018-05-23 13_40: EngineState:   fatal: 0 parameters
2018-05-23 13_40: EngineState:   error: 0 parameters
2018-05-23 13_40: EngineState:   threadsinfo: 0 parameters
2018-05-23 13_40: EngineState:   reboot: 0 parameters
2018-05-23 13_40: EngineState:   readconfig: 0 parameters
2018-05-23 13_40: EngineState:   writeconfig: 0 parameters
2018-05-23 13_40: EngineState:   burnconfig: 0 parameters
2018-05-23 13_40: EngineState:   resetconfig: 0 parameters
2018-05-23 13_40: EngineState:   rewriteconfig: 0 parameters
2018-05-23 13_40: EngineState:   lcdinfo: 0 parameters
2018-05-23 13_40: EngineState:   adcdebug: 1 parameters
2018-05-23 13_40: EngineState:   adc: 1 parameters
2018-05-23 13_40: EngineState:   egtinfo: 0 parameters
2018-05-23 13_40: EngineState:   egtread: 0 parameters
2018-05-23 13_40: EngineState:   caninfo: 0 parameters
2018-05-23 13_40: EngineState:   chartsize: 1 parameters
2018-05-23 13_40: EngineState:   chart: 1 parameters
2018-05-23 13_40: EngineState:   reset_engine_chart: 0 parameters
2018-05-23 13_40: EngineState:   triggerinfo: 0 parameters
2018-05-23 13_40: EngineState:   trigger_shape_info: 0 parameters
2018-05-23 13_40: EngineState:   reset_trigger: 0 parameters
2018-05-23 13_40: EngineState:   hipinfo: 0 parameters
2018-05-23 13_40: EngineState:   set_gain: 1 parameters
2018-05-23 13_40: EngineState:   set_band: 1 parameters
2018-05-23 13_40: EngineState:   set_hip_prescalerandsdo: 1 parameters
2018-05-23 13_40: EngineState:   set_knock_threshold: 1 parameters
2018-05-23 13_40: EngineState:   set_max_knock_sub_deg: 1 parameters
2018-05-23 13_40: EngineState:   sdinfo: 0 parameters
2018-05-23 13_40: EngineState:   mountsd: 0 parameters
2018-05-23 13_40: EngineState:   appendtolog: 1 parameters
2018-05-23 13_40: EngineState:   umountsd: 0 parameters
2018-05-23 13_40: EngineState:   ls: 1 parameters
2018-05-23 13_40: EngineState:   del: 1 parameters
2018-05-23 13_40: EngineState:   incfilename: 0 parameters
2018-05-23 13_40: EngineState:   i2c: 2 parameters
2018-05-23 13_40: EngineState:   speedinfo: 0 parameters
2018-05-23 13_40: EngineState:   joystickinfo: 0 parameters
2018-05-23 13_40: EngineState:   fl: 1 parameters
2018-05-23 13_40: EngineState:   warn: 1 parameters
2018-05-23 13_40: EngineState:   fuelinfo2: 2 parameters
2018-05-23 13_40: EngineState:   fuelinfo: 0 parameters
2018-05-23 13_40: EngineState:   set_led_blinking_period: 1 parameters
2018-05-23 13_40: EngineState:   status: 0 parameters
2018-05-23 13_40: EngineState:   analoginfo: 0 parameters
2018-05-23 13_40: EngineState:   set_float: 2 parameters
2018-05-23 13_40: EngineState:   set_int: 2 parameters
2018-05-23 13_40: EngineState:   set_short: 2 parameters
2018-05-23 13_40: EngineState:   set_bit: 3 parameters
2018-05-23 13_40: EngineState:   get_float: 1 parameters
2018-05-23 13_40: EngineState:   get_int: 1 parameters
2018-05-23 13_40: EngineState:   get_short: 1 parameters
2018-05-23 13_40: EngineState:   get_bit: 2 parameters
2018-05-23 13_40: EngineState:   set_sensor_chart_freq: 1 parameters
2018-05-23 13_40: EngineState:   showconfig: 0 parameters
2018-05-23 13_40: EngineState:   tempinfo: 0 parameters
2018-05-23 13_40: EngineState:   tpsinfo: 0 parameters
2018-05-23 13_40: EngineState:   info: 0 parameters
2018-05-23 13_40: EngineState:   set_one_coil_ignition: 0 parameters
2018-05-23 13_40: EngineState:   set_wasted_spark_ignition: 0 parameters
2018-05-23 13_40: EngineState:   set_individual_coils_ignition: 0 parameters
2018-05-23 13_40: EngineState:   set_whole_phase_map: 1 parameters
2018-05-23 13_40: EngineState:   set_whole_timing_map: 1 parameters
2018-05-23 13_40: EngineState:   set_whole_fuel_map: 1 parameters
2018-05-23 13_40: EngineState:   set_whole_ve_map: 1 parameters
2018-05-23 13_40: EngineState:   set_whole_ign_corr_map: 1 parameters
2018-05-23 13_40: EngineState:   set_fuel_map: 3 parameters
2018-05-23 13_40: EngineState:   set_timing_map: 3 parameters
2018-05-23 13_40: EngineState:   stopengine: 0 parameters
2018-05-23 13_40: EngineState:   enable_spi: 1 parameters
2018-05-23 13_40: EngineState:   disable_spi: 1 parameters
2018-05-23 13_40: EngineState:   enable: 1 parameters
2018-05-23 13_40: EngineState:   disable: 1 parameters
2018-05-23 13_40: EngineState:   set_toothed_wheel: 2 parameters
2018-05-23 13_40: EngineState:   set_flat_injector_lag: 1 parameters
2018-05-23 13_40: EngineState:   set_injector_lag: 2 parameters
2018-05-23 13_40: EngineState:   set_fan: 2 parameters
2018-05-23 13_40: EngineState:   set: 2 parameters
2018-05-23 13_40: EngineState:   get: 1 parameters
2018-05-23 13_40: EngineState:   showpin: 1 parameters
2018-05-23 13_40: EngineState:   set_injection_pin: 2 parameters
2018-05-23 13_40: EngineState:   set_ignition_pin: 2 parameters
2018-05-23 13_40: EngineState:   set_trigger_input_pin: 2 parameters
2018-05-23 13_40: EngineState:   set_trigger_simulator_pin: 2 parameters
2018-05-23 13_40: EngineState:   set_egt_cs_pin: 2 parameters
2018-05-23 13_40: EngineState:   set_egt_spi: 1 parameters
2018-05-23 13_40: EngineState:   set_trigger_simulator_mode: 2 parameters
2018-05-23 13_40: EngineState:   set_fuel_pump_pin: 1 parameters
2018-05-23 13_40: EngineState:   set_ac_pin: 1 parameters
2018-05-23 13_40: EngineState:   set_alternator_pin: 1 parameters
2018-05-23 13_40: EngineState:   set_idle_pin: 1 parameters
2018-05-23 13_40: EngineState:   set_main_relay_pin: 1 parameters
2018-05-23 13_40: EngineState:   set_analog_input_pin: 2 parameters
2018-05-23 13_40: EngineState:   set_logic_input_pin: 2 parameters
2018-05-23 13_40: EngineState:   set_pot_spi: 1 parameters
2018-05-23 13_40: EngineState:   tsinfo: 0 parameters
2018-05-23 13_40: EngineState:   reset_ts: 0 parameters
2018-05-23 13_40: EngineState:   set_ts_speed: 1 parameters
2018-05-23 13_40: EngineState:   binarytest: 0 parameters
2018-05-23 13_40: EngineState:   injector: 2 parameters
2018-05-23 13_40: EngineState:   fuelpumpbench: 0 parameters
2018-05-23 13_40: EngineState:   fuelpumpbench2: 1 parameters
2018-05-23 13_40: EngineState:   fanbench: 0 parameters
2018-05-23 13_40: EngineState:   fanbench2: 1 parameters
2018-05-23 13_40: EngineState:   dizzybench: 0 parameters
2018-05-23 13_40: EngineState:   milbench: 0 parameters
2018-05-23 13_40: EngineState:   fuelbench: 3 parameters
2018-05-23 13_40: EngineState:   sparkbench: 3 parameters
2018-05-23 13_40: EngineState:   fuelbench2: 5 parameters
2018-05-23 13_40: EngineState:   sparkbench2: 5 parameters
2018-05-23 13_40: EngineState: For more visit http://rusefi.com/wiki/index.php?title=Manual:Software:dev_console_commands
2018-05-23 13_40: EngineState: FATAL error: HW timer state 1
2018-05-23 13_40: EngineState: FATAL error: HW timer state 1
2018-05-23 13_40: EngineState: FATAL error: HW timer state 1
2018-05-23 13_40: EngineState: FATAL error: HW timer state 1
2018-05-23 13_40: EngineState: FATAL error: HW timer state 1
2018-05-23 13_40: EngineState: FATAL error: HW timer state 1
after reboot

Code: Select all

2018-05-23 13_37: EngineState: FATAL error: HW timer state 1
2018-05-23 13_37: EngineState: FATAL error: HW timer state 1
2018-05-23 13_37: EngineState: FATAL error: HW timer state 1
2018-05-23 13_37: EngineState: FATAL error: HW timer state 1
2018-05-23 13_37: EngineState: confirmation_set date 1527082629:19
2018-05-23 13_37: EngineState: FATAL error: HW timer state 1
2018-05-23 13_37: EngineState: FATAL error: HW timer state 1
2018-05-23 13_37: CommandQueue: Took 3 attempts
2018-05-23 13_37: EngineState: FATAL error: HW timer state 1
2018-05-23 13_37: EngineState: FATAL error: HW timer state 1
2018-05-23 13_37: EngineState: confirmation_ls /:4
2018-05-23 13_37: EngineState: Error: No File system is mounted
2018-05-23 13_37: EngineState: FATAL error: HW timer state 1
2018-05-23 13_37: EngineState: FATAL error: HW timer state 1
2018-05-23 13_37: EngineState: FATAL error: HW timer state 1
2018-05-23 13_37: EngineState: FATAL error: HW timer state 1
2018-05-23 13_37: EngineState: confirmation_set date 1527082646:19
2018-05-23 13_37: EngineState: FATAL error: HW timer state 1
2018-05-23 13_37: EngineState: FATAL error: HW timer state 1
2018-05-23 13_37: EngineState: FATAL error: HW timer state 1
2018-05-23 13_37: EngineState: confirmation_ls /:4
2018-05-23 13_37: EngineState: Error: No File system is mounted
2018-05-23 13_37: EngineState: FATAL error: HW timer state 1
2018-05-23 13_37: EngineState: FATAL error: HW timer state 1
2018-05-23 13_37: EngineState: FATAL error: HW timer state 1
Last edited by Tambralinga on Thu May 24, 2018 9:42 pm, edited 1 time in total.
Skype : shiva-p
+66 8 5357 5159
User avatar
kb1gtt
contributor
contributor
Posts: 3758
Joined: Tue Sep 10, 2013 1:42 am
Location: ME of USA

Re: Mitsubishi 4G63 and 4G92 (#6)

Post by kb1gtt »

Did you update your discovery programming chips interface? See below for some instructions on how to update the discovery firmware.
https://rusefi.com/wiki/index.php?title=Manual:Software:User/en#Load_firmware
Welcome to the friendlier side of internet crazy :)
User avatar
Tambralinga
donator
donator
Posts: 174
Joined: Wed Jun 18, 2014 8:36 am
Location: Bangkok, Thailand

Re: Mitsubishi 4G63 and 4G92 (#6)

Post by Tambralinga »

kb1gtt wrote:
Wed May 23, 2018 9:30 am
Did you update your discovery programming chips interface? See below for some instructions on how to update the discovery firmware.
https://rusefi.com/wiki/index.php?title=Manual:Software:User/en#Load_firmware
yes firmware new v2.J29.S0

Image

Image

Image
Skype : shiva-p
+66 8 5357 5159
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Mitsubishi 4G63 and 4G92 (#6)

Post by AndreyB »

A smaller problem is unknown [set_engine_type 16]

there needs to be a space after "set" now

set engine_type 16
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Mitsubishi 4G63 and 4G92 (#6)

Post by AndreyB »

but the bigger problem is the thing you are reporting, let me try reproducing
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
User avatar
Tambralinga
donator
donator
Posts: 174
Joined: Wed Jun 18, 2014 8:36 am
Location: Bangkok, Thailand

Re: Mitsubishi 4G63 and 4G92 (#6)

Post by Tambralinga »

russian wrote:
Fri May 25, 2018 2:38 am
but the bigger problem is the thing you are reporting, let me try reproducing

first step install firmware have error CRC.

EngineState: ERROR: CRC header size

I can not solve this proplem.
Skype : shiva-p
+66 8 5357 5159
User avatar
Tambralinga
donator
donator
Posts: 174
Joined: Wed Jun 18, 2014 8:36 am
Location: Bangkok, Thailand

Re: Mitsubishi 4G63 and 4G92 (#6)

Post by Tambralinga »

The problem that from pb1 ่junp to ground.
Skype : shiva-p
+66 8 5357 5159
User avatar
Tambralinga
donator
donator
Posts: 174
Joined: Wed Jun 18, 2014 8:36 am
Location: Bangkok, Thailand

Re: Mitsubishi 4G63 and 4G92 (#6)

Post by Tambralinga »

help me
The right values for first start engine.
what default standard for mitsubishi?

old config 2015

Image

Image

Image
Skype : shiva-p
+66 8 5357 5159
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Mitsubishi 4G63 and 4G92 (#6)

Post by AndreyB »

Tambralinga wrote:
Mon May 28, 2018 4:01 pm
help me
The right values for first start engine.
I do not understand the question. Do you want all 30 values for all these three screens? what seems to be problem exactly what is different with your other cars?
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
User avatar
Tambralinga
donator
donator
Posts: 174
Joined: Wed Jun 18, 2014 8:36 am
Location: Bangkok, Thailand

Re: Mitsubishi 4G63 and 4G92 (#6)

Post by Tambralinga »

I can start the engine with the value.

trigger type= miata NA
trigger angle offset =0
advance deg = 15
charge =70
it ok for mitsubishi
if connect afr LSU 4.2 need to use cj125 ?
Skype : shiva-p
+66 8 5357 5159
User avatar
Tambralinga
donator
donator
Posts: 174
Joined: Wed Jun 18, 2014 8:36 am
Location: Bangkok, Thailand

Re: Mitsubishi 4G63 and 4G92 (#6)

Post by Tambralinga »

I don't know how did it happen WARNING

Code: Select all

2018-06-11 23_04: EngineState: WARNING: interpolate: Same x1 and x2 in interpolate: 0.00/0.00
2018-06-11 23_04: EngineState: WARNING: interpolate: Same x1 and x2 in interpolate: 0.00/0.00
2018-06-11 23_05: EngineState: WARNING: interpolate: Same x1 and x2 in interpolate: 0.00/0.00
2018-06-11 23_05: EngineState: WARNING: interpolate: Same x1 and x2 in interpolate: 0.00/0.00
2018-06-11 23_05: EngineState: WARNING: interpolate: Same x1 and x2 in interpolate: 0.00/0.00
2018-06-11 23_05: EngineState: WARNING: interpolate: Same x1 and x2 in interpolate: 0.00/0.00
Skype : shiva-p
+66 8 5357 5159
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Mitsubishi 4G63 and 4G92 (#6)

Post by AndreyB »

Just made a chance to make these warnings more detailed - please update to latest firmware and tell me the new message

https://github.com/rusefi/rusefi/commit/e3dfcc4df910e033788a3eb838db2b8754d737db
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
User avatar
Tambralinga
donator
donator
Posts: 174
Joined: Wed Jun 18, 2014 8:36 am
Location: Bangkok, Thailand

Re: Mitsubishi 4G63 and 4G92 (#6)

Post by Tambralinga »

russian wrote:
Tue Jun 12, 2018 9:46 am
Just made a chance to make these warnings more detailed - please update to latest firmware and tell me the new message

https://github.com/rusefi/rusefi/commit/e3dfcc4df910e033788a3eb838db2b8754d737db
new firmwaer ok no warning
Skype : shiva-p
+66 8 5357 5159
User avatar
Tambralinga
donator
donator
Posts: 174
Joined: Wed Jun 18, 2014 8:36 am
Location: Bangkok, Thailand

Re: Mitsubishi 4G63 and 4G92 (#6)

Post by Tambralinga »

Can be used normally, but there are problems warning TPS

Code: Select all

2018-07-04 19_02: EngineState: WARNING: TPS too low: 0.03
2018-07-04 19_02: EngineState: WARNING: TPS too low: 0.15
2018-07-04 19_02: EngineState: WARNING: TPS too low: 0.03
2018-07-04 19_02: EngineState: WARNING: TPS too low: -0.03
tpsinfo

Code: Select all

2018-07-04 19_03: EngineState: confirmation_tpsinfo:7
2018-07-04 19_03: EngineState: tps min (closed) 126/max (full) 761 v=0.73 @PC1
2018-07-04 19_03: EngineState: current 10bit=126 value=0.00 rate=0.00
Skype : shiva-p
+66 8 5357 5159
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Mitsubishi 4G63 and 4G92 (#6)

Post by AndreyB »

Analog Input Settings -> "TPS low value detection threshold" you probably want it at zero or -3 maybe?
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
User avatar
Tambralinga
donator
donator
Posts: 174
Joined: Wed Jun 18, 2014 8:36 am
Location: Bangkok, Thailand

Re: Mitsubishi 4G63 and 4G92 (#6)

Post by Tambralinga »

russian wrote:
Mon Jul 09, 2018 9:32 pm
Analog Input Settings -> "TPS low value detection threshold" you probably want it at zero or -3 maybe?
Image

What should be used?
Skype : shiva-p
+66 8 5357 5159
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Mitsubishi 4G63 and 4G92 (#6)

Post by AndreyB »

Latest project file now contains some explanation

tpsErrorDetectionTooLow = "TPS error detection, what TPS % value is unrealistically low"
tpsErrorDetectionTooHigh = "TPS error detection, what TPS % value is unrealistically high"

Default values are -5% for tpsErrorDetectionTooLow and 105% for tpsErrorDetectionTooHigh or something like that.
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Post Reply