[info] Frankenso - ECU shield compatible with OEM case / official

Hardware inside and outside of the ECU
snua12
Posts: 4
Joined: Tue Jul 09, 2019 8:21 am
Soldering skill: yes
Coding skill?: yes

Re: Frankenso - ECU shield compatible with OEM case / official

Post by snua12 » Tue Aug 13, 2019 1:19 am

snua12 wrote:
Mon Aug 12, 2019 11:11 pm
I'm apologize, Leds are blinking. I've connected throttle body sensor and after few seconds display goes in "two line" mode. Tuner studio is working and throttle position sensor is working in Tuner studio.
Rusefi console is also working.

I understood that problem can be with hardware, dead display or dead gipo on CPU. Or someting in configuration.

Today I'v upload snapshot_20190806_000757_frankenso_na6_rusefi.
Problem was in settings, I've enable lcd display in Tuner Studio Controler-> LCD -> display mode -> hd44780. That was what I'm loogin for.

Ahmad
Posts: 22
Joined: Mon Aug 12, 2019 10:44 pm
Location: Iran
Soldering skill: yes
Coding skill?: yes

Re: Frankenso - ECU shield compatible with OEM case / official

Post by Ahmad » Sat Sep 07, 2019 10:32 pm

Hi
Is it prefer to use SDIO for MMC?
Is it supported with your code?

Abricos
contributor
contributor
Posts: 711
Joined: Mon Aug 18, 2014 12:32 am

Re: Frankenso - ECU shield compatible with OEM case / official

Post by Abricos » Sat Sep 07, 2019 10:46 pm

Ahmad wrote:
Sat Sep 07, 2019 10:32 pm
Hi
Is it prefer to use SDIO for MMC?
Is it supported with your code?
It's supposed SD card ...

User avatar
russian
Site Admin
Posts: 9597
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Soldering skill: yes
Coding skill?: yes
Contact:

Re: Frankenso - ECU shield compatible with OEM case / official

Post by russian » Sat Sep 07, 2019 10:54 pm

Ahmad wrote:
Sat Sep 07, 2019 10:32 pm
Is it prefer to use SDIO for MMC?
At the moment we only have SPI mode for SD hardware. SDIO mode is not supported in the firmware - see https://github.com/rusefi/rusefi/issues/683
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

atntpt
Posts: 74
Joined: Tue Apr 17, 2018 8:21 pm
Soldering skill: yes
Coding skill?: yes

Re: Frankenso - ECU shield compatible with OEM case / official

Post by atntpt » Tue Sep 10, 2019 7:11 pm

Can anyone help me understand why do i have this noise on analog inputs ?
The frequency of the noise seams to sync with some kind of led blink or something
Attachments
video_converter__1568142503662.mp4
(1.94 MiB) Downloaded 10 times

mck1117
running engine in first post
running engine in first post
Posts: 233
Joined: Mon Jan 30, 2017 2:05 am
Location: Seattle-ish
Soldering skill: yes
Coding skill?: yes

Re: Frankenso - ECU shield compatible with OEM case / official

Post by mck1117 » Tue Sep 10, 2019 8:06 pm

atntpt wrote:
Tue Sep 10, 2019 7:11 pm
Can anyone help me understand why do i have this noise on analog inputs ?
The frequency of the noise seams to sync with some kind of led blink or something
What does your wiring setup look like? What sensors are those connected to? How are they grounded? How is the ECU grounded?

atntpt
Posts: 74
Joined: Tue Apr 17, 2018 8:21 pm
Soldering skill: yes
Coding skill?: yes

Re: Frankenso - ECU shield compatible with OEM case / official

Post by atntpt » Tue Sep 10, 2019 8:57 pm

Testing on bench , I noticed if I power it via discovery usb the 5v line also varies .

User avatar
kb1gtt
contributor
contributor
Posts: 3442
Joined: Tue Sep 10, 2013 1:42 am
Location: ME of USA
Contact:

Re: Frankenso - ECU shield compatible with OEM case / official

Post by kb1gtt » Tue Sep 10, 2019 9:22 pm

Which LED did you disconnect to determine it was an LED?
Welcome to the friendlier side of internet crazy :)

atntpt
Posts: 74
Joined: Tue Apr 17, 2018 8:21 pm
Soldering skill: yes
Coding skill?: yes

Re: Frankenso - ECU shield compatible with OEM case / official

Post by atntpt » Wed Sep 11, 2019 6:36 pm

By led I meant a blinking frequency xD

mck1117
running engine in first post
running engine in first post
Posts: 233
Joined: Mon Jan 30, 2017 2:05 am
Location: Seattle-ish
Soldering skill: yes
Coding skill?: yes

Re: Frankenso - ECU shield compatible with OEM case / official

Post by mck1117 » Wed Sep 11, 2019 8:00 pm

atntpt wrote:
Tue Sep 10, 2019 8:57 pm
Testing on bench , I noticed if I power it via discovery usb the 5v line also varies .
I understand that you're testing on the bench, but how are the sensors connected? Are sensors connected at all?

atntpt
Posts: 74
Joined: Tue Apr 17, 2018 8:21 pm
Soldering skill: yes
Coding skill?: yes

Re: Frankenso - ECU shield compatible with OEM case / official

Post by atntpt » Wed Sep 11, 2019 9:02 pm

I have resistors simulating sensors

Post Reply