Hardware inside and outside of the ECU
acab
provoker
Posts: 263 Joined: Wed Dec 18, 2013 7:27 pm
Location: Minsk, BY
Post
by acab » Mon Dec 30, 2013 4:48 pm
Hello to all. I very poor in KiCad or Altium Designer and i search somebody who can help me to develop dongle with all necessary stuff for my WaveShare Port407Z development board.
Motherboard very simple and cheap. No problem to buy and very good scheme. What about development of dongle board with all stuff? Just plug and play for that board (or for Discovery board, just retrace all routes). Like sandwich
!
Thats photo for illustrate how it will be looks like.
Doew anybody want help?
Attachments
Port407Z.pdf
(651.27 KiB) Downloaded 640 times
acab
provoker
Posts: 263 Joined: Wed Dec 18, 2013 7:27 pm
Location: Minsk, BY
Post
by acab » Mon Dec 30, 2013 6:17 pm
I didnt want use jumper wires. I can use existing modules with my dev board. Its not a problem.
Idea to make "sandwich" dongle(shield) for dev board . Like Arduino shields. You just plug it to dev board and connect connector PCB like yours
TE 176122-6 .
AndreyB
Site Admin
Posts: 14381 Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B
Post
by AndreyB » Mon Dec 30, 2013 6:46 pm
It looks like we are mixing two different subjects here - one would be making a version of current modules for WaveShare Port407Z
And another separate subject would be the 'sandwich' approach - which is pretty close to
Project Frankenstein
acab
provoker
Posts: 263 Joined: Wed Dec 18, 2013 7:27 pm
Location: Minsk, BY
Post
by acab » Mon Dec 30, 2013 6:56 pm
in short:
make biiiiiig module with all needed functions, and that module can plug without any wires to motherboard.
if you make it for discovery i will buy discovery, if you help make it for waveshare port407 - it will be great.
AndreyB
Site Admin
Posts: 14381 Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B
Post
by AndreyB » Mon Dec 30, 2013 6:57 pm
Project Frankenstein is exactly what you are describing - it would be a 10x10 board which connects to discovery without any wires.
acab
provoker
Posts: 263 Joined: Wed Dec 18, 2013 7:27 pm
Location: Minsk, BY
Post
by acab » Mon Dec 30, 2013 7:00 pm
russian wrote: Project Frankenstein is exactly what you are describing - it would be a 10x10 board which connects to discovery without any wires.
Hmm, nice....
Does it real to make same for my dev board? My board have holes for mount
AndreyB
Site Admin
Posts: 14381 Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B
Post
by AndreyB » Mon Dec 30, 2013 7:02 pm
acab wrote: Does it real to make same for my dev board? My board have holes for mount
Everything is real! I am sure that you would be capable to learn KiCad
acab
provoker
Posts: 263 Joined: Wed Dec 18, 2013 7:27 pm
Location: Minsk, BY
Post
by acab » Mon Dec 30, 2013 7:08 pm
Nonono
I think there are many people who have WaveShare Port407Z dev board)!