Stihl has EFI chain saw and concrete saw.
EFI hand tools
- AndreyB
- Site Admin
- Posts: 14471
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
EFI hand tools
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
- AndreyB
- Site Admin
- Posts: 14471
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: EFI hand tools
Is that a 35ohm injector with peak&hold at 50volts?!
unfortunately my source of part photos is eBay "STIHL MS 500i MS500i Fuel Injector "
unfortunately my source of part photos is eBay "STIHL MS 500i MS500i Fuel Injector "
- Attachments
-
- WhatsApp Image 2024-08-11 at 21.55.57_e039c706.jpg (213.85 KiB) Viewed 3151 times
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
- AndreyB
- Site Admin
- Posts: 14471
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: EFI hand tools
Interesting, some are clean some are dirty.
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
- AndreyB
- Site Admin
- Posts: 14471
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: EFI hand tools
Position sensor seems to have blue plug (see first post for eBay photo) with three wires, one position unused.
Fun fact - unused position is what I believe is ground. So, ground pin is not used by position sensor - neither of the three used wires are buzzing to "power" ground.
Voltages are measured against that unused ground pin.
First scope is against that unused power ground
Two other scopes are using are with alligator clip on one of the three wires more or less randomly. All data captured while saw is running.
Fun fact - unused position is what I believe is ground. So, ground pin is not used by position sensor - neither of the three used wires are buzzing to "power" ground.
Voltages are measured against that unused ground pin.
First scope is against that unused power ground
Two other scopes are using are with alligator clip on one of the three wires more or less randomly. All data captured while saw is running.
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute