Hi everybody,
currently i want to test my RUSEFI design with STM32F4 discovery board, but i have hard time to obtain a HIP9011, so i would use one from older ECU (because scrap ecus are selled for low prices here). Can anybody send me bosch part numbers from ecus, that contain HIP9011?? I have a boosted engine so i will not test it without knock det.
If everyone is interrested i made a test board wich can be poppulated with STM32F4 (for RUSEFI) or with ARDUINO MEGA (for SPEEDUNO). I attach the PCB file.
HIP9011 - which ECUs use it
-
- donator
- Posts: 95
- Joined: Sun Feb 21, 2016 8:39 pm
HIP9011 - which ECUs use it
- Attachments
-
- speeduinoecuh_norelay_NOCJ_NOEGT__dualPCB 092016.zip
- (54.44 KiB) Downloaded 308 times
- AndreyB
- Site Admin
- Posts: 14334
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: HIP9011 - wich ECUs use it
https://octopart.com/search?q=tpic8101
tpic8101 by TI is compatible with HIP9011, that's what we are using
See https://e2e.ti.com/support/applications/automotive/f/26/t/84859
tpic8101 by TI is compatible with HIP9011, that's what we are using
See https://e2e.ti.com/support/applications/automotive/f/26/t/84859
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Re: HIP9011 - wich ECUs use it
Cool and good to see you made a board. Keep up doing cool things
If you post the schematic and BOM I could offer to do a review of your PCB layout and provide a constructive critique.
I do not know of a ECU that has a native TPIC or HIP chip. Sorry.
If you post the schematic and BOM I could offer to do a review of your PCB layout and provide a constructive critique.
I do not know of a ECU that has a native TPIC or HIP chip. Sorry.
Welcome to the friendlier side of internet crazy
-
- donator
- Posts: 95
- Joined: Sun Feb 21, 2016 8:39 pm
Re: HIP9011 - wich ECUs use it
Schematics and BOM will be available in few days, just after i test it. The PCB is only double sided because it is only for testing purposes, the final PCB will be 4 layer with propper EMC. This board is designed with "faking" resistors to fake the original ECU, connnectors are straight through, so if you plug it together it will connect the original ECU, but i you plug this board between, it will use it, very simple yet effective thing for debugging.
Regards
Regards