After damage my 4rd discovery board i decided repair them. Changed main chip but now can´t connect main board to ts or console.
If i use stm program i can update board and i can upload rusefi firware with sucess. Any ideas? Maybe need do some configuration?
ps: com port is listed on devices.
Discovery repair
- AndreyB
- Site Admin
- Posts: 14324
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: Discovery repair
Any LED activity?
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
-
- contributor
- Posts: 101
- Joined: Sun Jan 05, 2014 2:59 pm
Re: Discovery repair
Yes, power leds on and blue led flashing.
- AndreyB
- Site Admin
- Posts: 14324
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: Discovery repair
That's good news. So blue LED is flashing means the firmware if alive. Please erase chip/program again just to be sure you are running full defaults, if everything else is fine microUSB is supposed to be alive.Number-One wrote:blue led flashing.
Your other option is to try USB/TTL port (PC10/PC11) since that's independent hardware.
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
- AndreyB
- Site Admin
- Posts: 14324
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: Discovery repair
(not exactly repair - more like modification)
That's an old spreadsheet - I was trying all discovery pins to make sure they would blink an external LED. The red pins are the ones which did not blink for some reason.
PD0
PA15
PC8
PA9
Anyone has time to check what these are used for on discovery and if whatever would be removed from the board easily to make these pins usable for us?
That's an old spreadsheet - I was trying all discovery pins to make sure they would blink an external LED. The red pins are the ones which did not blink for some reason.
PD0
PA15
PC8
PA9
Anyone has time to check what these are used for on discovery and if whatever would be removed from the board easily to make these pins usable for us?
- Attachments
-
- screenshot.png (47.64 KiB) Viewed 4669 times
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute