[info] Prometheus - NEW compact ECU shield!

Hardware inside and outside of the ECU
jekyll and hide
Posts: 8
Joined: Mon Feb 04, 2019 7:19 am
Location: Иркутск

Re: Prometheus - NEW compact ECU shield!

Post by jekyll and hide »

Hi, is it possible to make a v02 board? what are the differences from v01
{Привет, можно ли изготавливать плату v02? какие отличия от v01}
P.S. буду заказывать 10 штук, цвет маски красный, могу организовать пересылку нуждающимся в рф, 10 штук стоит 2300 деревянных соответственно одна 230р, плюс за пересылку ТК или почтой. Заказываю у китайцев https://jlcpcb.com/
User avatar
andreika
donator
donator
Posts: 461
Joined: Mon Feb 13, 2017 2:35 pm
Location: Kiev

Re: Prometheus - NEW compact ECU shield!

Post by andreika »

jekyll and hide wrote:
Thu Feb 07, 2019 8:01 am
Hi, is it possible to make a v02 board? what are the differences from v01
The differences are here: https://github.com/andreika-git/prometheus/blob/master/hardware/CHANGES.TXT
User avatar
darxfame
contributor
contributor
Posts: 259
Joined: Mon Feb 13, 2017 10:06 pm
Location: Moscow

Re: Prometheus - NEW compact ECU shield!

Post by darxfame »

jekyll and hide wrote:
Thu Feb 07, 2019 8:01 am
Hi, is it possible to make a v02 board? what are the differences from v01
{Привет, можно ли изготавливать плату v02? какие отличия от v01}
P.S. буду заказывать 10 штук, цвет маски красный, могу организовать пересылку нуждающимся в рф, 10 штук стоит 2300 деревянных соответственно одна 230р, плюс за пересылку ТК или почтой. Заказываю у китайцев https://jlcpcb.com/
У меня в Москве есть еще штуки 3-4 в наличии версии 1
jekyll and hide
Posts: 8
Joined: Mon Feb 04, 2019 7:19 am
Location: Иркутск

Re: Prometheus - NEW compact ECU shield!

Post by jekyll and hide »

darxfame wrote:
Fri Feb 08, 2019 6:57 pm
jekyll and hide wrote:
Thu Feb 07, 2019 8:01 am
Hi, is it possible to make a v02 board? what are the differences from v01
{Привет, можно ли изготавливать плату v02? какие отличия от v01}
P.S. буду заказывать 10 штук, цвет маски красный, могу организовать пересылку нуждающимся в рф, 10 штук стоит 2300 деревянных соответственно одна 230р, плюс за пересылку ТК или почтой. Заказываю у китайцев https://jlcpcb.com/
У меня в Москве есть еще штуки 3-4 в наличии версии 1
Имеет ли смысл собирать версию 01? насколько критичны исправления в версии 02,
типа "+ линии электропередачи V12 и WV12 (WideBand) теперь разделены,
+ удалено ошибочное подключение CKPS2 + и R152 к земле,
+ резистор R13 (рядом с CJ125) подключен к контакту 22 U2, а не к земле,
+ добавлен дополнительный подтягивающий резистор для транзистора тахометра до + 5В (R165)"
yyj876790646
Posts: 11
Joined: Tue Jan 01, 2019 1:55 am

Re: Prometheus - NEW compact ECU shield!

Post by yyj876790646 »

I downlad latest version of rusefi firmware,I can successfully compile rusefi firmware but I failed in compiling prometheus firmware.I can't understand the error.I need your help.Compiling error picture is attached.Thanks! :?
Attachments
O5`_9T8L6LM3H[[R))VO~1Q.png
O5`_9T8L6LM3H[[R))VO~1Q.png (368.63 KiB) Viewed 16557 times
yyj876790646
Posts: 11
Joined: Tue Jan 01, 2019 1:55 am

Re: Prometheus - NEW compact ECU shield!

Post by yyj876790646 »

russian wrote:
Tue Feb 12, 2019 5:01 am
Please try again now, I hope I've fixed it.
Thanks,compile didn't succeedd but run for a long time,final error picture is attached:
Attachments
QQ图片20190212210529.png
QQ图片20190212210529.png (254.41 KiB) Viewed 16539 times
User avatar
andreika
donator
donator
Posts: 461
Joined: Mon Feb 13, 2017 2:35 pm
Location: Kiev

Re: Prometheus - NEW compact ECU shield!

Post by andreika »

yyj876790646 wrote:
Tue Feb 12, 2019 1:07 pm
Thanks,compile didn't succeedd but run for a long time,final error picture is attached:
This version compiles just fine: https://github.com/andreika-git/rusefi/tree/useTPSVETable
User avatar
darxfame
contributor
contributor
Posts: 259
Joined: Mon Feb 13, 2017 10:06 pm
Location: Moscow

Re: Prometheus - NEW compact ECU shield!

Post by darxfame »

jekyll and hide wrote:
Sat Feb 09, 2019 1:27 am
darxfame wrote:
Fri Feb 08, 2019 6:57 pm
jekyll and hide wrote:
Thu Feb 07, 2019 8:01 am
Hi, is it possible to make a v02 board? what are the differences from v01
{Привет, можно ли изготавливать плату v02? какие отличия от v01}
P.S. буду заказывать 10 штук, цвет маски красный, могу организовать пересылку нуждающимся в рф, 10 штук стоит 2300 деревянных соответственно одна 230р, плюс за пересылку ТК или почтой. Заказываю у китайцев https://jlcpcb.com/
У меня в Москве есть еще штуки 3-4 в наличии версии 1
Имеет ли смысл собирать версию 01? насколько критичны исправления в версии 02,
типа "+ линии электропередачи V12 и WV12 (WideBand) теперь разделены,
+ удалено ошибочное подключение CKPS2 + и R152 к земле,
+ резистор R13 (рядом с CJ125) подключен к контакту 22 U2, а не к земле,
+ добавлен дополнительный подтягивающий резистор для транзистора тахометра до + 5В (R165)"
если есть возможность сделать недорого, то можно сделать, иначе проще мне кажется использлвать первую версию
jekyll and hide
Posts: 8
Joined: Mon Feb 04, 2019 7:19 am
Location: Иркутск

Re: Prometheus - NEW compact ECU shield!

Post by jekyll and hide »

Prometheus V0.2 boards came, Russian Post as always "pleased" with the speed of work
Attachments
20190319_080414.jpg
20190319_080414.jpg (6.61 MiB) Viewed 16257 times
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Prometheus - NEW compact ECU shield!

Post by AndreyB »

andreika wrote:
Sun Jun 04, 2017 12:24 pm
I wrote Bluetooth initialization code for rusEFI and tested the Bluetooth module. It works like a charm! :D
Set baud rate to 115200 - no problems! 8-)
On average @andreika is three years in front of me. Only yesterday Bluetooth initialization code was finally enabled for all rusEFI builds. Just think what @andreika has now and I will only comprehend in three years from now?!

We need more people prying cool stuff out of @andreika, I bet there is more to pry... :lol:
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
User avatar
kb1gtt
contributor
contributor
Posts: 3758
Joined: Tue Sep 10, 2013 1:42 am
Location: ME of USA

Re: Prometheus - NEW compact ECU shield!

Post by kb1gtt »

Yeah, his DSP stuff for Knock, VR, and some other features like that are some really cool stuff.
Welcome to the friendlier side of internet crazy :)
Post Reply