Page 6 of 6
Re: Prometheus - NEW compact ECU shield!
Posted: Thu Feb 07, 2019 8:01 am
by jekyll and hide
Hi, is it possible to make a v02 board? what are the differences from v01
{Привет, можно ли изготавливать плату v02? какие отличия от v01}
P.S. буду заказывать 10 штук, цвет маски красный, могу организовать пересылку нуждающимся в рф, 10 штук стоит 2300 деревянных соответственно одна 230р, плюс за пересылку ТК или почтой. Заказываю у китайцев
https://jlcpcb.com/
Re: Prometheus - NEW compact ECU shield!
Posted: Thu Feb 07, 2019 12:11 pm
by andreika
jekyll and hide wrote: ↑Thu Feb 07, 2019 8:01 am
Hi, is it possible to make a v02 board? what are the differences from v01
The differences are here:
https://github.com/andreika-git/prometheus/blob/master/hardware/CHANGES.TXT
Re: Prometheus - NEW compact ECU shield!
Posted: Fri Feb 08, 2019 6:57 pm
by darxfame
jekyll and hide wrote: ↑Thu Feb 07, 2019 8:01 am
Hi, is it possible to make a v02 board? what are the differences from v01
{Привет, можно ли изготавливать плату v02? какие отличия от v01}
P.S. буду заказывать 10 штук, цвет маски красный, могу организовать пересылку нуждающимся в рф, 10 штук стоит 2300 деревянных соответственно одна 230р, плюс за пересылку ТК или почтой. Заказываю у китайцев
https://jlcpcb.com/
У меня в Москве есть еще штуки 3-4 в наличии версии 1
Re: Prometheus - NEW compact ECU shield!
Posted: Sat Feb 09, 2019 1:27 am
by jekyll and hide
darxfame wrote: ↑Fri Feb 08, 2019 6:57 pm
jekyll and hide wrote: ↑Thu Feb 07, 2019 8:01 am
Hi, is it possible to make a v02 board? what are the differences from v01
{Привет, можно ли изготавливать плату v02? какие отличия от v01}
P.S. буду заказывать 10 штук, цвет маски красный, могу организовать пересылку нуждающимся в рф, 10 штук стоит 2300 деревянных соответственно одна 230р, плюс за пересылку ТК или почтой. Заказываю у китайцев
https://jlcpcb.com/
У меня в Москве есть еще штуки 3-4 в наличии версии 1
Имеет ли смысл собирать версию 01? насколько критичны исправления в версии 02,
типа "+ линии электропередачи V12 и WV12 (WideBand) теперь разделены,
+ удалено ошибочное подключение CKPS2 + и R152 к земле,
+ резистор R13 (рядом с CJ125) подключен к контакту 22 U2, а не к земле,
+ добавлен дополнительный подтягивающий резистор для транзистора тахометра до + 5В (R165)"
Re: Prometheus - NEW compact ECU shield!
Posted: Tue Feb 12, 2019 3:00 am
by yyj876790646
I downlad latest version of rusefi firmware,I can successfully compile rusefi firmware but I failed in compiling prometheus firmware.I can't understand the error.I need your help.Compiling error picture is attached.Thanks!
Re: Prometheus - NEW compact ECU shield!
Posted: Tue Feb 12, 2019 1:07 pm
by yyj876790646
russian wrote: ↑Tue Feb 12, 2019 5:01 am
Please try again now, I hope I've fixed it.
Thanks,compile didn't succeedd but run for a long time,final error picture is attached:
Re: Prometheus - NEW compact ECU shield!
Posted: Tue Feb 12, 2019 3:04 pm
by andreika
yyj876790646 wrote: ↑Tue Feb 12, 2019 1:07 pm
Thanks,compile didn't succeedd but run for a long time,final error picture is attached:
This version compiles just fine:
https://github.com/andreika-git/rusefi/tree/useTPSVETable
Re: Prometheus - NEW compact ECU shield!
Posted: Tue Feb 19, 2019 8:12 pm
by darxfame
jekyll and hide wrote: ↑Sat Feb 09, 2019 1:27 am
darxfame wrote: ↑Fri Feb 08, 2019 6:57 pm
jekyll and hide wrote: ↑Thu Feb 07, 2019 8:01 am
Hi, is it possible to make a v02 board? what are the differences from v01
{Привет, можно ли изготавливать плату v02? какие отличия от v01}
P.S. буду заказывать 10 штук, цвет маски красный, могу организовать пересылку нуждающимся в рф, 10 штук стоит 2300 деревянных соответственно одна 230р, плюс за пересылку ТК или почтой. Заказываю у китайцев
https://jlcpcb.com/
У меня в Москве есть еще штуки 3-4 в наличии версии 1
Имеет ли смысл собирать версию 01? насколько критичны исправления в версии 02,
типа "+ линии электропередачи V12 и WV12 (WideBand) теперь разделены,
+ удалено ошибочное подключение CKPS2 + и R152 к земле,
+ резистор R13 (рядом с CJ125) подключен к контакту 22 U2, а не к земле,
+ добавлен дополнительный подтягивающий резистор для транзистора тахометра до + 5В (R165)"
если есть возможность сделать недорого, то можно сделать, иначе проще мне кажется использлвать первую версию
Re: Prometheus - NEW compact ECU shield!
Posted: Tue Mar 19, 2019 12:17 am
by jekyll and hide
Prometheus V0.2 boards came, Russian Post as always "pleased" with the speed of work
Re: Prometheus - NEW compact ECU shield!
Posted: Sun May 03, 2020 4:19 pm
by AndreyB
andreika wrote: ↑Sun Jun 04, 2017 12:24 pm
I wrote Bluetooth initialization code for rusEFI and tested the Bluetooth module. It works like a charm!
Set baud rate to 115200 - no problems!
On average
@andreika is three years in front of me. Only yesterday Bluetooth initialization code was finally enabled for all rusEFI builds. Just think what
@andreika has now and I will only comprehend in three years from now?!
We need more people prying cool stuff out of
@andreika, I bet there is more to pry...
Re: Prometheus - NEW compact ECU shield!
Posted: Sun May 03, 2020 11:47 pm
by kb1gtt
Yeah, his DSP stuff for Knock, VR, and some other features like that are some really cool stuff.