Hello everybody.
I have almost ready for etching my final PCBs and i want to ask, if there is any working GPS support/logging for rusefi?
[info] GPS support / logging
- AndreyB
- Site Admin
- Posts: 14334
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: GPS support / logging
On the one hand we have the code - https://github.com/rusefi/rusefi/blob/master/firmware/hw_layer/neo6m.cpp
On another hand we have not touched it for a while. Give me a board with neo6m attached to a dedicated UART and I will fix GPS logging if it needs fixing
On another hand we have not touched it for a while. Give me a board with neo6m attached to a dedicated UART and I will fix GPS logging if it needs fixing
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
-
- donator
- Posts: 95
- Joined: Sun Feb 21, 2016 8:39 pm
Re: GPS support / logging
I will test it, when the boards will be made. I have now I2C pins free, i will integrate 9DOF too. Hopefully sometimes this module will be supported to make some really profesional logs with acceleration etc...