52 pin connector for Galant VR4 pnp

Hardware inside and outside of the ECU
Post Reply
gptech2444
Posts: 46
Joined: Mon Jan 22, 2018 9:01 pm

52 pin connector for Galant VR4 pnp

Post by gptech2444 »

Hi,

Just picked up another car and I would like to do a pnp.

1992 Galant VR4

This is the connector 52pin ND
Image

Picture from diyautotune.

Does anyone know of anyone else that does a pcb to wire up one of these connectors?

User avatar
AndreyB
Site Admin
Posts: 10851
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City

Re: 52 pin connector for Galant VR4 pnp

Post by AndreyB »

24 pin plug www.te.com/usa-en/product-172317-7.html
18 pin housing 172316-7
10 pin housing 172315-7
contacts 170353-1
This series is called "pulse lock"
The housing you have is http://www.te.com/usa-en/product-172319-1.html
Now you need to interest someone to design the PCB :)
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

gptech2444
Posts: 46
Joined: Mon Jan 22, 2018 9:01 pm

Re: 52 pin connector for Galant VR4 pnp

Post by gptech2444 »

russian wrote:
Sun Feb 04, 2018 10:25 am
Now you need to interest someone to design the PCB :)
If I say pretty please you'll make some?

User avatar
kb1gtt
contributor
contributor
Posts: 3684
Joined: Tue Sep 10, 2013 1:42 am
Location: ME of USA

Re: 52 pin connector for Galant VR4 pnp

Post by kb1gtt »

It will be a bit of time before I could do this. I'm trying to focus on the Common Rail Diesel board. I wonder if I might be able to encourage @ to give this a go. The below link is the last one I did, it's a fairly good reference.
https://rusefi.com/forum/viewtopic.php?f=4&t=1303

I might need an occasional poke as a reminder to keep this on the radar.
Welcome to the friendlier side of internet crazy :)

gptech2444
Posts: 46
Joined: Mon Jan 22, 2018 9:01 pm

Re: 52 pin connector for Galant VR4 pnp

Post by gptech2444 »

The prices just for the connectors are quite high.

I might just get the connector from DIYautotune when I'm ready to do it.

User avatar
kb1gtt
contributor
contributor
Posts: 3684
Joined: Tue Sep 10, 2013 1:42 am
Location: ME of USA

Re: 52 pin connector for Galant VR4 pnp

Post by kb1gtt »

Once @ gets to merge, this should be available for review.
Attachments
172319-1_connector_iso.png
172319-1_connector_iso.png (59.3 KiB) Viewed 2664 times
Welcome to the friendlier side of internet crazy :)

User avatar
AndreyB
Site Admin
Posts: 10851
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City

Re: 52 pin connector for Galant VR4 pnp

Post by AndreyB »

That's some sweet progress :)

Some files are now available at https://github.com/rusefi/rusefi/tree/master/hardware/172319-1_52pin-connector but at the moment KiCAD application and knowledge are required. Let's produce PCB pdf files to enable simpller paper printing test?
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

User avatar
AndreyB
Site Admin
Posts: 10851
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City

Re: 52 pin connector for Galant VR4 pnp

Post by AndreyB »

We now have https://github.com/rusefi/rusefi/blob/master/hardware/172319-1_52pin-connector/172319-1_connector_LAYOUT.pdf

Next step is printing this at 100% scale and checking if that looks right against a real physical connector. I might have one at home by the way but I am couple weeks away from home.
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

User avatar
kb1gtt
contributor
contributor
Posts: 3684
Joined: Tue Sep 10, 2013 1:42 am
Location: ME of USA

Re: 52 pin connector for Galant VR4 pnp

Post by kb1gtt »

Also are there silk screen suggestions? Right now there basically isn't anything more than a revision number.
Welcome to the friendlier side of internet crazy :)

Joeldc510
Posts: 29
Joined: Mon Jan 22, 2018 4:04 am

Re: 52 pin connector for Galant VR4 pnp

Post by Joeldc510 »

kb1gtt wrote:
Sun Feb 04, 2018 1:09 pm
It will be a bit of time before I could do this. I'm trying to focus on the Common Rail Diesel board. I wonder if I might be able to encourage @ to give this a go. The below link is the last one I did, it's a fairly good reference.
https://rusefi.com/forum/viewtopic.php?f=4&t=1303

I might need an occasional poke as a reminder to keep this on the radar.
Sorry guys, my laptop's power supply circuit gave up on me and didn't purchase a laptop until today basically :?

User avatar
AndreyB
Site Admin
Posts: 10851
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City

Re: 52 pin connector for Galant VR4 pnp

Post by AndreyB »

https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

Post Reply