[help needed] Stm32f4 integration

[Ilcapo]

Hello rusefi.com forum,

Has anyone integrated stm32 and all the required components into the frankenso board? If so do you have a list of all the components need?

Thank you
Gabriele

PS: I have board v 0.2

[AndreyB]

This was done on 0.2 board once - see
https://rusefi.com/images/Frankenso/frankenso_0_2_native_box.jpg
https://rusefi.com/images/Frankenso/frankenso_0_2_native_hi_res.jpg

There is also



I call it "native stm32f4" but cannot find any mentioning on this on the forum, it must be buried somewhere from 2 years ago

I believe schematics/BOM should be available https://github.com/rusefi/rusefi/tree/master/hardware/rusefi_hardware_history/frankenso_rev00.20

[AndreyB]

Also https://rusefi.com/forum/viewtopic.php?f=4&t=381 could be helpful since the same board

[kb1gtt]

As well the current BOM indicates which components are for this part of the frankenso board. See last column titled "PageName" at this CSV file. The STM32 stuff should be the ones marked "stm32f407_board"
https://github.com/rusefi/rusefi/blob/master/hardware/frankenso/frankenso.csv