Main Board PROG USB connector

Hardware inside and outside of the ECU
Post Reply
stefanst
contributor
contributor
Posts: 703
Joined: Wed Feb 17, 2016 12:24 am
Location: USA 08530

Main Board PROG USB connector

Post by stefanst »

My brain seems to be on vacation. We have a "PROG" USB connector on the main board. I'm pretty sure I used it on my previous rusefi. However, I can't seem to make it work on the latest one (Board #82). Is there a jumper to enable it that I forgot about?

BTW: Building this one for a '91 Miata with VVT engine swap. Just like the humpback.
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Main Board PROG USB connector

Post by AndreyB »

I believe it is best to flash firmware via top green board connector and change settings via bottom green board micro usb connector.

Usb port is smarter thus more reliable than red board ttl prog port.
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
stefanst
contributor
contributor
Posts: 703
Joined: Wed Feb 17, 2016 12:24 am
Location: USA 08530

Re: Main Board PROG USB connector

Post by stefanst »

There's my problem then. I was trying to conenct to Tunerstudio via the "PROG" port on the mainboard. That's not going to happen, is it?
So TS is still either the Micro-USB, or Uart to PC10 and PC11 or whatever that was- correct?
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Main Board PROG USB connector

Post by AndreyB »

Prog is for native stm32 on frankenso only is not it?
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
stefanst
contributor
contributor
Posts: 703
Joined: Wed Feb 17, 2016 12:24 am
Location: USA 08530

Re: Main Board PROG USB connector

Post by stefanst »

Correct. Hence my brain-fart problem.
Post Reply