Trigger Wheel Teeth
Trigger Wheel Teeth
I am taking my flywheel to the machinist tomorrow and just want to understand if there are any restrictions on the number of teeth and skip teeth with RusEFI? This is for a single cylinder 2 stroke engine. Since it will be manual machining, the machinist may be restricted by his equipment. so probably 36, 24, 20... at least to the degree.
-
AndreyB
- Site Admin
- Posts: 14328
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: Trigger Wheel Teeth
36-1 and 60-2 are popular optuons but rusefi can fo any x-y
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
-
mck1117
- running engine in first post
- Posts: 1494
- Joined: Mon Jan 30, 2017 2:05 am
- Location: Seattle-ish
Re: Trigger Wheel Teeth
Tons of teeth can have a little trouble at very high RPM, so 24-1 is probably a safe bet.