[info] Nucleo144 wings

Hardware inside and outside of the ECU
Post Reply
User avatar
Site Admin
Posts: 10761
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City

Nucleo144 wings

Post by AndreyB »

It's time for us to look at 144 pin versions of stm32 more closely, and with ETB and DI and other dreams we need a new prototyping approach.

The overall idea is to be able to stick a bunch of two-header breakout boards vertically into these 10x10 boards which with enough jumpers wires would let you route all needed signals to either nuckeo144 or your favorite harness connector.
nucleo144 0_1 wing.jpg
nucleo144 0_1 wing.jpg (1.12 MiB) Viewed 3517 times
nucleo144 0_1 wing pcb.jpg
nucleo144 0_1 wing pcb.jpg (424.6 KiB) Viewed 3517 times
PCB sources and gerbers are located at https://github.com/rusefi/hw_modular/tree/master/NUCLEO144_wing

This is my take on the 22mm Manhattan ideas see https://rusefi.com/forum/viewtopic.php?f=4&t=1459

Next step would be making a couple of boards in this format and figuring out how to place a combined multi-design order within this ridiculously cheap 10x10 two layer convention:

1) new format of https://rusefi.com/forum/viewtopic.php?f=4&t=450
2) fixed & new format of https://rusefi.com/forum/viewtopic.php?f=4&t=1471
3) need to develop https://rusefi.com/forum/viewtopic.php?f=4&t=1521
4) maybe TLE8888 https://rusefi.com/forum/viewtopic.php?f=4&t=1496 but probably not

Fun fact - back in 2013 here is how rusEfi looked like, the approach here is intended to make this approach a bit more comfortable and reliable.


very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

Post Reply