[info] 134 pin breakout 967288

Hardware inside and outside of the ECU
Post Reply
User avatar
AndreyB
Site Admin
Posts: 11041
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

134 pin breakout 967288

Post by AndreyB »

BMW likes this 134 pin header 967288 https://www.te.com/usa-en/product-7-967288-1.html - seems to be used all the way from 3 series e46 to v12 e65/e66

Also known as 965497-1

Seems to be same outer shape as 121 pin

https://www.ebay.com/itm/333534819202
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

User avatar
AndreyB
Site Admin
Posts: 11041
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: 134 pin breakout 967288

Post by AndreyB »

Some documentation refers to this as Standard Shell Construction connector.

And my v12 seems to be using it.
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

User avatar
AndreyB
Site Admin
Posts: 11041
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: 134 pin breakout 967288

Post by AndreyB »

https://github.com/rusefi/rusefi/tree/master/hardware/Breakout_134pin_7-967288-1-Connector paper test is a success!

I have a couple of new connectors arriving in a few days.
Attachments
paper_test_success.jpg
paper_test_success.jpg (521.09 KiB) Viewed 4592 times
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

User avatar
AndreyB
Site Admin
Posts: 11041
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: 134 pin breakout 967288

Post by AndreyB »

Progress
Attachments
unnamed.png
unnamed.png (57.72 KiB) Viewed 4536 times
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

User avatar
AndreyB
Site Admin
Posts: 11041
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: 134 pin breakout 967288

Post by AndreyB »

Is that a miracle? It has simply snapped in as expected. Rev 0.1 seems to be a complete and utter success.
Attachments
967288_breakout_v_0_1.jpg
967288_breakout_v_0_1.jpg (344.1 KiB) Viewed 4462 times
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

User avatar
kb1gtt
contributor
contributor
Posts: 3703
Joined: Tue Sep 10, 2013 1:42 am
Location: ME of USA

Re: 134 pin breakout 967288

Post by kb1gtt »

Sweet and don't jinks it. I kind of wanted fatter traces, or at least a cup holder :)
Welcome to the friendlier side of internet crazy :)

User avatar
AndreyB
Site Admin
Posts: 11041
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: 134 pin breakout 967288

Post by AndreyB »

https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

User avatar
AndreyB
Site Admin
Posts: 11041
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: 134 pin breakout 967288

Post by AndreyB »

Code: Select all

1)                  left and right side x9 pin section need much wider traces at least where possible - some of those are used for not smart coils thus higher current.
is it even possible to make single 1oz traces work with not smart coil current?
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

mck1117
running engine in first post
running engine in first post
Posts: 735
Joined: Mon Jan 30, 2017 2:05 am
Location: Seattle-ish

Re: 134 pin breakout 967288

Post by mck1117 »

AndreyB wrote:
Sat May 30, 2020 12:31 am

Code: Select all

1)                  left and right side x9 pin section need much wider traces at least where possible - some of those are used for not smart coils thus higher current.
is it even possible to make single 1oz traces work with not smart coil current?
of course - plenty of OEM ECUs do it. You just have to use a trace wider than 10-12 thou or whatever it is on this board.

User avatar
AndreyB
Site Admin
Posts: 11041
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: 134 pin breakout 967288

Post by AndreyB »

We have more copper in version 0.2

We also have some gerber diff magic which I am not yet sure how to read at https://rusefi.com/docs/diffs/plots_134pin_7-967288-1/web/
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

User avatar
kb1gtt
contributor
contributor
Posts: 3703
Joined: Tue Sep 10, 2013 1:42 am
Location: ME of USA

Re: 134 pin breakout 967288

Post by kb1gtt »

Diff is cool.
Welcome to the friendlier side of internet crazy :)

Post Reply