[info] Proteus - Waterproof, High-feature ECU!

Hardware inside and outside of the ECU
User avatar
AndreyB
Site Admin
Posts: 10851
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City

Re: Proteus - Waterproof, High-feature ECU!

Post by AndreyB »

jamesuk wrote:
Sun Aug 16, 2020 9:13 pm
ah rite ok , if there's no other interest from uk at this time is there anyway of me still getting one ? ta
yes, there are a lot of ways to ship things across the pond. Let's see if we will have M73 harness progress in the next 9 days or not.
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

jamesuk
Posts: 16
Joined: Sun Aug 16, 2020 6:45 pm

Re: Proteus - Waterproof, High-feature ECU!

Post by jamesuk »

hope so , need this bloody engine running lol

OrchardPerformance
contributor
contributor
Posts: 222
Joined: Tue Jul 24, 2018 8:55 pm

Re: Proteus - Waterproof, High-feature ECU!

Post by OrchardPerformance »

It will only take 2 or 3 people wanting one to make it worth me whipping up a batch of 5pc here in the UK.

Edit - Actually if you are happy to have a rev 0.3 board without knock detection then I have a pair of boards here now and would be happy to let one go. I would just have to program and test it.
It would actually be the board I used for the assembly video.
Now keeping MRE and Proteus in stock in the UK, PM or slack for details.

MgFoster
Posts: 36
Joined: Fri Dec 14, 2018 6:15 pm

Re: Proteus - Waterproof, High-feature ECU!

Post by MgFoster »

Pm sent!

tmbryhn
Posts: 42
Joined: Wed Feb 12, 2020 2:40 am

Re: Proteus - Waterproof, High-feature ECU!

Post by tmbryhn »

I downloaded the Proteus_f4 bundle to play around and familiarize myself a little bit in TS.
How may fuel ever be enabled while "Injection configuration" is grayed out? Is there some other setting that needs to be enabled first?
I've already played around a bit with trigger and engine config in general, but that didn't seem to make any change :?
Fuel settings.jpg
Fuel settings.jpg (278.58 KiB) Viewed 2400 times

User avatar
AndreyB
Site Admin
Posts: 10851
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City

Re: Proteus - Waterproof, High-feature ECU!

Post by AndreyB »

I believe things are not well because you are not connected to an ECU and defaults are very invalid all over the place. Things would be way better once you connect to real ECU with default configuration build into ECU firmware.

We do not have valid defaults build into TS project only into ECU firmware.
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

mck1117
running engine in first post
running engine in first post
Posts: 620
Joined: Mon Jan 30, 2017 2:05 am
Location: Seattle-ish

Re: Proteus - Waterproof, High-feature ECU!

Post by mck1117 »

Oops - looks like that's actually a little bit of a mistake. The option to enable injection is inside that first greyed out option - "Injection configuration". You could probably enable by manually editing the msq, or by just downloading & opening the already filled in tune for my car here: https://rusefi.com/online/view.php?msq=196

edit: it'll be fixed once this pull request merges and new bundles are generated: https://github.com/rusefi/rusefi/pull/1724

xXxdRiFt_GODXxX
Posts: 1
Joined: Mon Aug 24, 2020 7:25 pm

Re: Proteus - Waterproof, High-feature ECU!

Post by xXxdRiFt_GODXxX »

In for this batch, cant PM but throw mine in with mgfoster's box ;)

Joey120373
donator
donator
Posts: 61
Joined: Sun May 17, 2020 8:46 am

Re: Proteus - Waterproof, High-feature ECU!

Post by Joey120373 »

is there any updates on the group buy? i sent a PM and am on the list but i haven't heard much in the way of updates.

I am not a facebook or twitter slack or whatever the latest social media type of guy, guess I'm just an old "forum dinosaur" type.
So i always worry i miss something on faceytweet or whatever.

User avatar
AndreyB
Site Admin
Posts: 10851
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City

Re: Proteus - Waterproof, High-feature ECU!

Post by AndreyB »

Status update: new version 0.4 is getting closer, I assume the group buy would be for latest 0.4 version. Which theoretically comes with risks but Proteus has a great track record, all revisions were totally usable :)
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

mck1117
running engine in first post
running engine in first post
Posts: 620
Joined: Mon Jan 30, 2017 2:05 am
Location: Seattle-ish

Re: Proteus - Waterproof, High-feature ECU!

Post by mck1117 »

Yes - I owe y'all an update. Work on 0.4 is just about done, with no real major changes (mostly just additions and fixes) from 0.3.

I'll probably place the order for boards some time in the next week, as they're the longest lead time (7-12 days from order to delivery).

User avatar
AndreyB
Site Admin
Posts: 10851
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City

Re: Proteus - Waterproof, High-feature ECU!

Post by AndreyB »

Slack is not a social thing by the way, it's in the direction of https://en.wikipedia.org/wiki/Internet_Relay_Chat
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

young_boomer
Posts: 1
Joined: Tue Aug 25, 2020 12:56 am

Re: Proteus - Waterproof, High-feature ECU!

Post by young_boomer »

I want in for this batch too. Can't wait to illegally convert my boat to EFI and explode and sink. I can't PM either yet but I want 2 boards.

mck1117
running engine in first post
running engine in first post
Posts: 620
Joined: Mon Jan 30, 2017 2:05 am
Location: Seattle-ish

Re: Proteus - Waterproof, High-feature ECU!

Post by mck1117 »

young_boomer wrote:
Tue Aug 25, 2020 1:42 am
I want in for this batch too. Can't wait to illegally convert my boat to EFI and explode and sink. I can't PM either yet but I want 2 boards.
Perhaps EFI will finally convince your boat to actually run and not {list of various failures of your boat}

User avatar
kneelo
Posts: 21
Joined: Sun Jun 10, 2018 6:36 am
Location: Western Australia

Re: Proteus - Waterproof, High-feature ECU!

Post by kneelo »

Anyone have an STL for a 3d printed case for this?

mck1117
running engine in first post
running engine in first post
Posts: 620
Joined: Mon Jan 30, 2017 2:05 am
Location: Seattle-ish

Re: Proteus - Waterproof, High-feature ECU!

Post by mck1117 »

kneelo wrote:
Tue Aug 25, 2020 9:51 am
Anyone have an STL for a 3d printed case for this?
I know @OrchardPerformance was working on one at some point...

ganderson47
Posts: 1
Joined: Tue Aug 25, 2020 8:59 pm

Re: Proteus - Waterproof, High-feature ECU!

Post by ganderson47 »

yadda lad requests a Proteus .4
96' montego miata

OrchardPerformance
contributor
contributor
Posts: 222
Joined: Tue Jul 24, 2018 8:55 pm

Re: Proteus - Waterproof, High-feature ECU!

Post by OrchardPerformance »

Case has been getting updated to rev 0.3/0.4 tonight so it has extra back space for the capacitor and the front USB as an option.
Will hopefully have some decent progress and a new STL package tomorrow.
Now keeping MRE and Proteus in stock in the UK, PM or slack for details.

mck1117
running engine in first post
running engine in first post
Posts: 620
Joined: Mon Jan 30, 2017 2:05 am
Location: Seattle-ish

Re: Proteus - Waterproof, High-feature ECU!

Post by mck1117 »

ganderson47 wrote:
Tue Aug 25, 2020 9:02 pm
yadda lad requests a Proteus .4
yadda lad is added to the glorious Protean Atlanta Box

mck1117
running engine in first post
running engine in first post
Posts: 620
Joined: Mon Jan 30, 2017 2:05 am
Location: Seattle-ish

Re: Proteus - Waterproof, High-feature ECU!

Post by mck1117 »

Hey everybody - just about time for me to order boards. I think the total batch is going to be 15, so there are a few still up for grabs.

I'll be sending PMs with my PayPal info so y'all can get paid up.

chbright
Posts: 1
Joined: Sun Aug 30, 2020 8:47 pm

Re: Proteus - Waterproof, High-feature ECU!

Post by chbright »

Definitely interested in this next group buy (and yes I know I just registered).

Looking to put this in an ecotec Miata. Seams like a better bet than an ms3.

I see a few guys here are lemons, aer and old chump competitors, this seams like the perfect ECU for a chump/champcar build ;)

mck1117
running engine in first post
running engine in first post
Posts: 620
Joined: Mon Jan 30, 2017 2:05 am
Location: Seattle-ish

Re: Proteus - Waterproof, High-feature ECU!

Post by mck1117 »

chbright wrote:
Sun Aug 30, 2020 8:56 pm
Definitely interested in this next group buy (and yes I know I just registered).

Looking to put this in an ecotec Miata. Seams like a better bet than an ms3.

I see a few guys here are lemons, aer and old chump competitors, this seams like the perfect ECU for a chump/champcar build ;)
I run one of mine (I think I have 5 boards at this point?) in my Lucky Dog Volvo 240 :)

mck1117
running engine in first post
running engine in first post
Posts: 620
Joined: Mon Jan 30, 2017 2:05 am
Location: Seattle-ish

Re: Proteus - Waterproof, High-feature ECU!

Post by mck1117 »

image.png
image.png (88.23 KiB) Viewed 2125 times
PCBs have been ordered!

User avatar
AndreyB
Site Admin
Posts: 10851
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City

Re: Proteus - Waterproof, High-feature ECU!

Post by AndreyB »

How many? 25 hopefully?
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

mck1117
running engine in first post
running engine in first post
Posts: 620
Joined: Mon Jan 30, 2017 2:05 am
Location: Seattle-ish

Re: Proteus - Waterproof, High-feature ECU!

Post by mck1117 »

AndreyB wrote:
Tue Sep 01, 2020 8:29 pm
How many? 25 hopefully?
20

simon.uwatt
Posts: 1
Joined: Thu Oct 26, 2017 9:10 am

Re: Proteus - Waterproof, High-feature ECU!

Post by simon.uwatt »

ok, count me in now.

Joey120373
donator
donator
Posts: 61
Joined: Sun May 17, 2020 8:46 am

Re: Proteus - Waterproof, High-feature ECU!

Post by Joey120373 »

Payment sent, 1 board, thanks!

flexus
Posts: 1
Joined: Wed Sep 09, 2020 4:25 am

Re: Proteus - Waterproof, High-feature ECU!

Post by flexus »

ya mind tossing an extra board in to ship to Atlantis? +1 for the one you zed. Gotta make mgfoster pay for the shipping to keep costs down.

mck1117
running engine in first post
running engine in first post
Posts: 620
Joined: Mon Jan 30, 2017 2:05 am
Location: Seattle-ish

Re: Proteus - Waterproof, High-feature ECU!

Post by mck1117 »

flexus wrote:
Wed Sep 09, 2020 4:30 am
ya mind tossing an extra board in to ship to Atlantis? +1 for the one you zed. Gotta make mgfoster pay for the shipping to keep costs down.
Anything we can do to make mgfoster pay is worth it.

mck1117
running engine in first post
running engine in first post
Posts: 620
Joined: Mon Jan 30, 2017 2:05 am
Location: Seattle-ish

Re: Proteus - Waterproof, High-feature ECU!

Post by mck1117 »

Partially assembled boards have arrived from China!
650F423C-783C-4004-B234-93DCB8C9D2FC.jpeg
650F423C-783C-4004-B234-93DCB8C9D2FC.jpeg (178.92 KiB) Viewed 1788 times

Post Reply