rusefi.com

jamesuk wrote: ↑

Sun Aug 16, 2020 9:13 pm

ah rite ok , if there's no other interest from uk at this time is there anyway of me still getting one ? ta

yes, there are a lot of ways to ship things across the pond. Let's see if we will have M73 harness progress in the next 9 days or not.

hope so , need this bloody engine running lol

It will only take 2 or 3 people wanting one to make it worth me whipping up a batch of 5pc here in the UK.

Edit - Actually if you are happy to have a rev 0.3 board without knock detection then I have a pair of boards here now and would be happy to let one go. I would just have to program and test it.
It would actually be the board I used for the assembly video.

Pm sent!

I downloaded the Proteus_f4 bundle to play around and familiarize myself a little bit in TS.
How may fuel ever be enabled while "Injection configuration" is grayed out? Is there some other setting that needs to be enabled first?
I've already played around a bit with trigger and engine config in general, but that didn't seem to make any change

I believe things are not well because you are not connected to an ECU and defaults are very invalid all over the place. Things would be way better once you connect to real ECU with default configuration build into ECU firmware.

We do not have valid defaults build into TS project only into ECU firmware.

Oops - looks like that's actually a little bit of a mistake. The option to enable injection is inside that first greyed out option - "Injection configuration". You could probably enable by manually editing the msq, or by just downloading & opening the already filled in tune for my car here: https://rusefi.com/online/view.php?msq=196

edit: it'll be fixed once this pull request merges and new bundles are generated: https://github.com/rusefi/rusefi/pull/1724

In for this batch, cant PM but throw mine in with mgfoster's box

is there any updates on the group buy? i sent a PM and am on the list but i haven't heard much in the way of updates.

I am not a facebook or twitter slack or whatever the latest social media type of guy, guess I'm just an old "forum dinosaur" type.
So i always worry i miss something on faceytweet or whatever.

Status update: new version 0.4 is getting closer, I assume the group buy would be for latest 0.4 version. Which theoretically comes with risks but Proteus has a great track record, all revisions were totally usable

Yes - I owe y'all an update. Work on 0.4 is just about done, with no real major changes (mostly just additions and fixes) from 0.3.

I'll probably place the order for boards some time in the next week, as they're the longest lead time (7-12 days from order to delivery).

Slack is not a social thing by the way, it's in the direction of https://en.wikipedia.org/wiki/Internet_Relay_Chat

I want in for this batch too. Can't wait to illegally convert my boat to EFI and explode and sink. I can't PM either yet but I want 2 boards.

young_boomer wrote: ↑

Tue Aug 25, 2020 1:42 am

I want in for this batch too. Can't wait to illegally convert my boat to EFI and explode and sink. I can't PM either yet but I want 2 boards.

Perhaps EFI will finally convince your boat to actually run and not {list of various failures of your boat}

Anyone have an STL for a 3d printed case for this?

kneelo wrote: ↑

Tue Aug 25, 2020 9:51 am

Anyone have an STL for a 3d printed case for this?

I know @OrchardPerformance was working on one at some point...

yadda lad requests a Proteus .4

Case has been getting updated to rev 0.3/0.4 tonight so it has extra back space for the capacitor and the front USB as an option.
Will hopefully have some decent progress and a new STL package tomorrow.

ganderson47 wrote: ↑

Tue Aug 25, 2020 9:02 pm

yadda lad requests a Proteus .4

yadda lad is added to the glorious Protean Atlanta Box

Hey everybody - just about time for me to order boards. I think the total batch is going to be 15, so there are a few still up for grabs.

I'll be sending PMs with my PayPal info so y'all can get paid up.

Definitely interested in this next group buy (and yes I know I just registered).

Looking to put this in an ecotec Miata. Seams like a better bet than an ms3.

I see a few guys here are lemons, aer and old chump competitors, this seams like the perfect ECU for a chump/champcar build

chbright wrote: ↑

Sun Aug 30, 2020 8:56 pm

Definitely interested in this next group buy (and yes I know I just registered).

Looking to put this in an ecotec Miata. Seams like a better bet than an ms3.

I see a few guys here are lemons, aer and old chump competitors, this seams like the perfect ECU for a chump/champcar build

I run one of mine (I think I have 5 boards at this point?) in my Lucky Dog Volvo 240

PCBs have been ordered!

How many? 25 hopefully?

AndreyB wrote: ↑

Tue Sep 01, 2020 8:29 pm

How many? 25 hopefully?

20

ok, count me in now.

Payment sent, 1 board, thanks!

ya mind tossing an extra board in to ship to Atlantis? +1 for the one you zed. Gotta make mgfoster pay for the shipping to keep costs down.

flexus wrote: ↑

Wed Sep 09, 2020 4:30 am

ya mind tossing an extra board in to ship to Atlantis? +1 for the one you zed. Gotta make mgfoster pay for the shipping to keep costs down.

Anything we can do to make mgfoster pay is worth it.

Partially assembled boards have arrived from China!