SPI Barometric Presure Sensor BMP 180/280

Hardware inside and outside of the ECU
Post Reply
Posts: 98
Joined: Tue Apr 17, 2018 8:21 pm

SPI Barometric Presure Sensor BMP 180/280

Post by atntpt »

BMP 180/280 is a small sensor that mesures Temp, Pressure (Barometric) and Humidity.
This sensor is VERY inexpensive specialy compared with a mpxh that is the usual choice.
This would be a very nice addition to the code to support such type of sensors, barometric correction is very usefull..
Code for stm32 is available so I think would´t be very difficult to implement such!??
Boards like Micro and Proteus could benefit from it since they came already assembled from Jlc and they have a alternative part for less than 1US (C233787).


Last edited by atntpt on Sat Apr 18, 2020 6:45 pm, edited 3 times in total.
User avatar
Site Admin
Posts: 11389
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Bmp 180/280

Post by AndreyB »

Thank you for editing your post towards https://en.wikipedia.org/wiki/BLUF_(communication)
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239
Post Reply