Page 1 of 1
MREAdapter68 VAG
Posted: Wed May 06, 2020 11:39 pm
by AndreyB
Re: MREAdapter68 VAG
Posted: Wed May 06, 2020 11:40 pm
by AndreyB
Re: MREAdapter68 VAG
Posted: Thu May 07, 2020 12:03 am
by AndreyB
Same exact plastic case holds two sizes ECU. Looks like ECUs are keyed differently but PCB is the same, just a bit of extra length on the longer one.
Metal case lid bolts directly to 68 pin connector throgh holes in PCB.
Long one is 152mm
Short one is 112mm
I believe we do not need the heat sink alumimum bracket and we do not need these holes.
It would be nice to have the two small holes for the black side plastic sheet mouting.
Re: MREAdapter68 VAG
Posted: Thu May 07, 2020 3:38 am
by Abricos
- Screenshot_2015-05-27-13-05-12_1 (2).jpg (448.43 KiB) Viewed 6234 times
Re: MREAdapter68 VAG
Posted: Wed Jun 17, 2020 11:55 am
by AndreyB
Re: MREAdapter68 VAG
Posted: Tue Jun 30, 2020 1:31 am
by AndreyB
Version 0.1 arrived
Re: MREAdapter68 VAG
Posted: Mon Jul 13, 2020 1:04 am
by AndreyB
First test results
Re: MREAdapter68 VAG
Posted: Sun Aug 16, 2020 9:42 pm
by AndreyB
And that's the board which run the engine