Direct injection v8

Hardware inside and outside of the ECU
Post Reply
Lrseries3
Posts: 1
Joined: Thu May 21, 2020 11:12 pm

Direct injection v8

Post by Lrseries3 »

Hello everyone this is my first post 🙂
I have an engine which I would like to run. It is from a 2010 jaguar xfr.
5.0l v8 supercharged
direct fuel injection
dual cam per head with variable cam timing
has a denso ECU and Bosch injectors.
I have the factory car ECU but I don't know if it's enough to make it work. Are you able to modify my current ECU? or else supply a new one to run it? Thank you.
received_278361880194438.jpeg
received_278361880194438.jpeg (82.16 KiB) Viewed 733 times
Attachments
received_875308006271382.jpeg
received_875308006271382.jpeg (164.56 KiB) Viewed 733 times
received_665324910914496.jpeg
received_665324910914496.jpeg (95.79 KiB) Viewed 733 times

mck1117
running engine in first post
running engine in first post
Posts: 615
Joined: Mon Jan 30, 2017 2:05 am
Location: Seattle-ish

Re: Direct injection v8

Post by mck1117 »

That's an awesome project!

rusEfi is not ready to run your engine. We've made it to the point of clicking single injectors, but no direct injection engine is close to running. We also don't yet support multi vvt, so that wouldn't work either.

Are there older versions of this engine with port injection, from which you could swap on an intake?

I would highly suggest trying to get the factory ECU to behave for now, and try rusEfi later once our GDI support is more mature.

User avatar
AndreyB
Site Admin
Posts: 10828
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City

Re: Direct injection v8

Post by AndreyB »

Matt is the voice of wisdom.

I am sure there are off-the-shelf options for you, Motec probably? Not sure if $2K or $6K.

Multi-vvt is easy with good motivation.

Complete GDI in 12 months is probably 60% at this point? We do make slow progress - see https://rusefi.com/forum/viewtopic.php?f=4&t=1337 and https://rusefi.com/forum/viewtopic.php?f=3&t=1631

Feel free to throw money at us https://www.patreon.com/rusefi

I am too far from Malta, if you would have been close to New York I would have borrowed this engine for tests :) I only have an old v12 myself.
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

User avatar
AndreyB
Site Admin
Posts: 10828
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City

Re: Direct injection v8

Post by AndreyB »

HPFP setup is different from BMW N73 - two pumps are both on the same aux shaft driven by crank, instead of two pumps driven by two cam shafts.
Attachments
fuel_pump1.jpg
fuel_pump1.jpg (24.63 KiB) Viewed 723 times
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

mck1117
running engine in first post
running engine in first post
Posts: 615
Joined: Mon Jan 30, 2017 2:05 am
Location: Seattle-ish

Re: Direct injection v8

Post by mck1117 »

AndreyB wrote:
Fri May 22, 2020 12:27 am
HPFP setup is different from BMW N73
That looks exactly like the pump that was on my 2013 Focus. I think it's called a Bosch HDP 5.

User avatar
AndreyB
Site Admin
Posts: 10828
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City

Re: Direct injection v8

Post by AndreyB »

Any updates?
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

Post Reply