tunerstudio trigger angle

Hardware inside and outside of the ECU
Post Reply
Andreas_28023
Posts: 12
Joined: Sat Aug 24, 2019 1:54 pm
Location: Sweden

tunerstudio trigger angle

Post by Andreas_28023 »

Hello

In which direction should I measure trigger angle offset, alpha or beta?

Kind regards
Andreas

Image

mck1117
running engine in first post
running engine in first post
Posts: 620
Joined: Mon Jan 30, 2017 2:05 am
Location: Seattle-ish

Re: tunerstudio trigger angle

Post by mck1117 »

Andreas_28023 wrote:
Fri Oct 09, 2020 5:54 am
Hello

In which direction should I measure trigger angle offset, alpha or beta?

Kind regards
AndreasImage

Skickat från min SM-N960F via Tapatalk
In this case, I think you want to use negative alpha. My car has the missing tooth roughly 90 degrees BTDC #1, and I enter 86 to get the timing light to match up.

Yours looks like around -60 or so.

User avatar
AndreyB
Site Admin
Posts: 10851
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City

Re: tunerstudio trigger angle

Post by AndreyB »

Should we change parameter label from "trigger angle offset" to "trigger angle advance"?
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

mck1117
running engine in first post
running engine in first post
Posts: 620
Joined: Mon Jan 30, 2017 2:05 am
Location: Seattle-ish

Re: tunerstudio trigger angle

Post by mck1117 »

AndreyB wrote:
Fri Oct 09, 2020 6:01 am
Should we change parameter label from "trigger angle offset" to "trigger angle advance"?
it's probably at least worth explaining in a tooltip

User avatar
AndreyB
Site Admin
Posts: 10851
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City

Re: tunerstudio trigger angle

Post by AndreyB »

https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

Andreas_28023
Posts: 12
Joined: Sat Aug 24, 2019 1:54 pm
Location: Sweden

Re: tunerstudio trigger angle

Post by Andreas_28023 »

Thanks

//Andreas

Skickat från min SM-N960F via Tapatalk


Post Reply