rusefi.com • HellenNA6 is a Hellen for NA6 and NA8 with 64 pin connector

Page 1 of 1

HellenNA6 is a Hellen for NA6 and NA8 with 64 pin connector

Posted: Fri Apr 30, 2021 1:39 am

by AndreyB

http://rusefi.com/s/hellenNA6 has landed
Primary test mule https://rusefi.com/forum/viewtopic.php?t=1926

https://www.ebay.com/itm/234060110093

Re: HellenNA6 is a Hellen for NA6 and NA8 with 64 pin connector

Posted: Fri Apr 30, 2021 3:39 pm

by AndreyB

https://github.com/rusefi/rusefi/wiki/Hardware/Hellen/hellen64_miataNA6_94-a-schematic.pdf is the schematic for the board we have

https://github.com/rusefi/rusefi/wiki/Hardware/Hellen/hellen64_miataNA6_94-b-schematic.pdf if a draft of next revision with schematics readability improvements

Re: HellenNA6 is a Hellen for NA6 and NA8 with 64 pin connector

Posted: Thu May 06, 2021 10:25 pm

by AndreyB

Jesse how did you get this drilling so straight and nice?

Re: HellenNA6 is a Hellen for NA6 and NA8 with 64 pin connector

Posted: Thu May 06, 2021 10:27 pm

by BeerMoneyMotorsports

Unfortunately i cant measure worth a damn, so the holes are a bit off. Used a drill bit and then step drill.

Re: HellenNA6 is a Hellen for NA6 and NA8 with 64 pin connector

Posted: Thu May 27, 2021 9:58 pm

by AndreyB

We are ready to declare HellenNA6 rev A a good enough success. At least three boards are available for sale at https://www.ebay.com/itm/334017109387

Re: HellenNA6 is a Hellen for NA6 and NA8 with 64 pin connector

Posted: Wed Jun 23, 2021 8:24 am

by AndreyB

Finally on eBay https://www.ebay.com/itm/234060110093