rusefi.com

Proteus 76 pin Mitsubishi adapter

Norman has Mitsubishi GTO which in US would be Mitsubishi 3000GT. That v6 engine shares ECU with 2nd generation Eclipse and many many Lancers! Sounds like we are making an adapter and maybe a Hellen if this takes off

https://github.com/rusefi/proteus-mitsubishi76-adapter/

https://github.com/rusefi/proteus-M54-adapter is an adapter for the simpler e46 models the one with older M52 style COPs

Abovementioned M54

AndreyB wrote: ↑

Fri Oct 29, 2021 2:42 pm

https://github.com/rusefi/proteus-mitsubishi76-adapter/

Arrived

Full list of https://github.com/rusefi/rusefi/wiki/Proteus#adapters-done

A starter pack to figure one of these out would be Proteus pinout and schematics of your specific adapter, and then you configure pins in TS accordingly.

https://rusefi.com/docs/pinouts/proteus/

OBD2A schematics https://github.com/rusefi/proteus-Honda-OBD2A-adapter/blob/main/proteusOBD2Ahonda/boards/proteusOBD2Ahonda-a/board/proteusOBD2Ahonda-a-schematic.pdf

Honda K schematics https://github.com/rusefi/proteus-Honda-K-125-adapter/blob/main/proteus125honda/boards/proteus125honda-a/board/proteus125honda-a-schematic.pdf

I take aliexpress pigtails, de-pin half of them to flip pin order on the other side of 23 pin (pin 1 wires to pin 8, everything else mirrored same way)

for 35 pin I use while on one end, same mirroring pin 1 becomes pin 12.

Mark should have two adapters delivered to him next week - GM E67 and dual-pinout Harley. If things go well we might Hellen both GM and Harley in the next few weeks.

First adapter for two different generations of same vehicle! This one is Harley

AndreyB wrote: ↑

Thu Feb 24, 2022 8:01 pm

Mark should have two adapters delivered to him next week - GM E67

Well, rev A was a total failure. rev B is a total success

https://rusefi.com/online/view.php?log=710

Mark will FB either this or better one soon, for now let me post this here

Wish us luck