4 and 8 port canbus hub

[opelpanfan]

Hi

I made 4/8 port canbus hub with common power rail and canbus end terminator resistors.

The 4 port project can be found :
https://oshwlab.com/b.brazdziunas/can-hub-mini

s-l1600.jpg (278.48 KiB) Viewed 3437 times

s-l1600 (1).jpg (218.47 KiB) Viewed 3437 times

canhub.PNG (53.75 KiB) Viewed 3437 times

The 8 port project can be found :
https://oshwlab.com/b.brazdziunas/can-hub

Can be used as all 8 ports on one bus or set two independent busses with independent or shared power rails.
Personally, I use 8 port hub for two-speed can busses (250kbps and 500kbps), 250kbps bus use 5v power rail where 500kbps use 12v power rail.

canhub_large.PNG (102.49 KiB) Viewed 3430 times

[Zeiss]

Ohhh, very nice stuff, thank you very much for that!

The wire connectors are this: click me, correct?

[opelpanfan]

PCB connectors are:
https://www.mouser.co.uk/ProductDetail/654-AT04-4P-BM03

Wire Connectors:
https://www.mouser.co.uk/ProductDetail/TE-Connectivity-DEUTSCH/DT06-4S-CE05?qs=vkMqrgFpRagdEBdFvWvYxA%3D%3D

[Zeiss]

Thank you very much!