Hardware inside and outside of the ECU
-
AndreyB
- Site Admin
- Posts: 13681
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B

Post
by AndreyB »
Artery at32f435zmt7 + L9779
Artery has a couple of pin differences comparing with stm32.
8450086873 8450086874
Update: Granta uses 8450110707
https://github.com/rusefi/m74.9/

-
AndreyB
- Site Admin
- Posts: 13681
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B

Post
by AndreyB »
So many unpopulated components did they account for not having L9779 just in case?!

- image.png (382.21 KiB) Viewed 1130 times
-
AndreyB
- Site Admin
- Posts: 13681
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B

Post
by AndreyB »
It was confirmed that the PCB is dual purpose stm32 and at32

- image.png (980.1 KiB) Viewed 991 times
-
AndreyB
- Site Admin
- Posts: 13681
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B

Post
by AndreyB »
m74.9 259.3765 004-01 was spotted on
https://en.wikipedia.org/wiki/GAZelle_NEXT which is produced in higher volumes.
-
Attachments
-

- gaz-m74.9-259.3765-004-01.jpg (129.64 KiB) Viewed 675 times
-
AndreyB
- Site Admin
- Posts: 13681
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B

Post
by AndreyB »
They now have brand new off the shelf ECU units for under $200
Just put a few hours into Artery at32f435 port of rusEFI in a separate repo
https://github.com/rusefi/fw-AT-START-F435
Makes little sense overall but to cool of an engineering challenge to pass by!