Leaning new skills - making a M111 harness

[AndreyB]

Jimmy has allowed me to touch his Hellen, it's a classic rev A.

Tune as arrived https://rusefi.com/online/view.php?msq=1426

Firmware is https://github.com/rusefi/rusefi/releases/tag/20220317.release or something very close to that date.

[AndreyB]

Damn am I an idiot I cannot find pinout for 4 way GM TMAP?

https://github.com/rusefi/m111/issues/8

image.png (256.36 KiB) Viewed 1380 times

[AndreyB]

Progress!

[AndreyB]

Rubber sleeves next time, larger diameter heat shrink next time.

[puff]

you could have opened an online master-class
or at least publish some videos of the process..

I was always wondering how the four (or the eight - in case of v8) same-coloured injector wires are connected together.

[AndreyB]

microRusEFI now has a canned default for M111 and following images show which wire should go towards what MRE pin

image.png (36.92 KiB) Viewed 1031 times

[AndreyB]

Current state of reference tune https://rusefi.com/online/view.php?msq=1439

Just updated https://github.com/rusefi/rusefi/wiki/HOWTO-M111-on-microRusEFI

[mck1117]

Damn am I an idiot I cannot find pinout for 4 way GM TMAP?

I suspect the other side of that says Bosch, no?

If so, https://www.bosch-motorsport.com/content/downloads/Raceparts/en-GB/54264971144257547.html

[AndreyB]

A note for Jimmy

image.png (1.81 MiB) Viewed 851 times

image.png (1.88 MiB) Viewed 851 times

[AndreyB]

Self-soldering interesting

[AndreyB]

Wow cool stuff I am so not there yet

image.png (1.18 MiB) Viewed 587 times

image.png (1.01 MiB) Viewed 587 times